Microsoft Windows [版本 6.1.7601]
版权所有 (c) 2009 Microsoft Corporation。保留所有权利。

C:\Users\Administrator>cd C:\MongoDB\Server\3.4\bin

C:\MongoDB\Server\3.4\bin>

C:\MongoDB\Server\3.4\bin>mongod --help
Options:

General options:
  -h [ --help ]                         show this usage information
  --version                             show version information
  -f [ --config ] arg                   configuration file specifying
                                        additional options
  -v [ --verbose ] [=arg(=v)]           be more verbose (include multiple times
                                        for more verbosity e.g. -vvvvv)
  --quiet                               quieter output
  --port arg                            specify port number - 27017 by default
  --bind_ip arg                         comma separated list of ip addresses to
                                        listen on - all local ips by default
  --ipv6                                enable IPv6 support (disabled by
                                        default)
  --maxConns arg                        max number of simultaneous connections
                                        - 1000000 by default
  --logpath arg                         log file to send write to instead of
                                        stdout - has to be a file, not
                                        directory
  --logappend                           append to logpath instead of
                                        over-writing
  --logRotate arg                       set the log rotation behavior
                                        (rename|reopen)
  --timeStampFormat arg                 Desired format for timestamps in log
                                        messages. One of ctime, iso8601-utc or
                                        iso8601-local
  --pidfilepath arg                     full path to pidfile (if not set, no
                                        pidfile is created)
  --keyFile arg                         private key for cluster authentication
  --noauth                              run without security
  --setParameter arg                    Set a configurable parameter
  --httpinterface                       enable http interface
  --transitionToAuth                    For rolling access control upgrade.
                                        Attempt to authenticate over outgoing
                                        connections and proceed regardless of
                                        success. Accept incoming connections
                                        with or without authentication.
  --clusterAuthMode arg                 Authentication mode used for cluster
                                        authentication. Alternatives are
                                        (keyFile|sendKeyFile|sendX509|x509)
  --networkMessageCompressors arg       Comma-separated list of compressors to
                                        use for network messages
  --auth                                run with security
  --jsonp                               allow JSONP access via http (has
                                        security implications)
  --rest                                turn on simple rest api
  --slowms arg (=100)                   value of slow for profile and console
                                        log
  --profile arg                         0=off 1=slow, 2=all
  --cpu                                 periodically show cpu and iowait
                                        utilization
  --sysinfo                             print some diagnostic system
                                        information
  --noIndexBuildRetry                   don't retry any index builds that were
                                        interrupted by shutdown
  --noscripting                         disable scripting engine
  --notablescan                         do not allow table scans

Windows Service Control Manager options:
  --install                             install Windows service
  --remove                              remove Windows service
  --reinstall                           reinstall Windows service (equivalent
                                        to --remove followed by --install)
  --serviceName arg                     Windows service name
  --serviceDisplayName arg              Windows service display name
  --serviceDescription arg              Windows service description
  --serviceUser arg                     account for service execution
  --servicePassword arg                 password used to authenticate
                                        serviceUser

Replication options:
  --oplogSize arg                       size to use (in MB) for replication op
                                        log. default is 5% of disk space (i.e.
                                        large is good)

Master/slave options (old; use replica sets instead):
  --master                              master mode
  --slave                               slave mode
  --source arg                          when slave: specify master as
                                        <server:port>
  --only arg                            when slave: specify a single database
                                        to replicate
  --slavedelay arg                      specify delay (in seconds) to be used
                                        when applying master ops to slave
  --autoresync                          automatically resync if slave data is
                                        stale

Replica set options:
  --replSet arg                         arg is <setname>[/<optionalseedhostlist
                                        >]
  --replIndexPrefetch arg               specify index prefetching behavior (if
                                        secondary) [none|_id_only|all]
  --enableMajorityReadConcern           enables majority readConcern

Sharding options:
  --configsvr                           declare this is a config db of a
                                        cluster; default port 27019; default
                                        dir /data/configdb
  --shardsvr                            declare this is a shard db of a
                                        cluster; default port 27018

Storage options:
  --storageEngine arg                   what storage engine to use - defaults
                                        to wiredTiger if no data files present
  --dbpath arg                          directory for datafiles - defaults to
                                        \data\db\ which is C:\data\db\ based on
                                        the current working drive
  --directoryperdb                      each database will be stored in a
                                        separate directory
  --noprealloc                          disable data file preallocation - will
                                        often hurt performance
  --nssize arg (=16)                    .ns file size (in MB) for new databases
  --quota                               limits each database to a certain
                                        number of files (8 default)
  --quotaFiles arg                      number of files allowed per db, implies
                                        --quota
  --smallfiles                          use a smaller default file size
  --syncdelay arg (=60)                 seconds between disk syncs (0=never,
                                        but not recommended)
  --upgrade                             upgrade db if needed
  --repair                              run repair on all dbs
  --repairpath arg                      root directory for repair files -
                                        defaults to dbpath
  --journal                             enable journaling
  --nojournal                           disable journaling (journaling is on by
                                        default for 64 bit)
  --journalOptions arg                  journal diagnostic options
  --journalCommitInterval arg           how often to group/batch commit (ms)

WiredTiger options:
  --wiredTigerCacheSizeGB arg           maximum amount of memory to allocate
                                        for cache; defaults to 1/2 of physical
                                        RAM
  --wiredTigerStatisticsLogDelaySecs arg (=0)
                                        seconds to wait between each write to a
                                        statistics file in the dbpath; 0 means
                                        do not log statistics
  --wiredTigerJournalCompressor arg (=snappy)
                                        use a compressor for log records
                                        [none|snappy|zlib]
  --wiredTigerDirectoryForIndexes       Put indexes and data in different
                                        directories
  --wiredTigerCollectionBlockCompressor arg (=snappy)
                                        block compression algorithm for
                                        collection data [none|snappy|zlib]
  --wiredTigerIndexPrefixCompression arg (=1)
                                        use prefix compression on row-store
                                        leaf pages


C:\MongoDB\Server\3.4\bin>
C:\MongoDB\Server\3.4\bin>
C:\MongoDB\Server\3.4\bin>
C:\MongoDB\Server\3.4\bin>mongod --install --serviceName "MongoDB" --httpinterface --rest --bind_ip 0.0.0.0 --port 27017 --dbpath C:\MongoDB\Server\3.4\data\db --logpath C:\MongoDB\Server\3.4\data\log\log.txt --logappend

C:\MongoDB\Server\3.4\bin>
C:\MongoDB\Server\3.4\bin>
C:\MongoDB\Server\3.4\bin>net start MongoDB
MongoDB 服务正在启动 ..
MongoDB 服务已经启动成功。


C:\MongoDB\Server\3.4\bin>mongo
MongoDB shell version v3.4.24
connecting to: mongodb://127.0.0.1:27017
MongoDB server version: 3.4.24
Server has startup warnings:
2023-08-05T16:58:17.407+0800 I CONTROL  [initandlisten]
2023-08-05T16:58:17.407+0800 I CONTROL  [initandlisten] ** WARNING: Access control is not enabled for the database.
2023-08-05T16:58:17.407+0800 I CONTROL  [initandlisten] **          Read and write access to data and configuration is unrestricted.
2023-08-05T16:58:17.408+0800 I CONTROL  [initandlisten]
2023-08-05T16:58:17.408+0800 I CONTROL  [initandlisten] Hotfix KB2731284 or later update is not installed, will zero-out data files.
2023-08-05T16:58:17.408+0800 I CONTROL  [initandlisten]
>
>
> db
test
>
>
> exit
bye

C:\MongoDB\Server\3.4\bin>
C:\MongoDB\Server\3.4\bin>
C:\MongoDB\Server\3.4\bin>net stop MongoDB
MongoDB 服务正在停止.
MongoDB 服务已成功停止。


C:\MongoDB\Server\3.4\bin>mongod --remove
2023-08-05T17:02:56.106+0800 I CONTROL  [main] Trying to remove Windows service 'MongoDB'
2023-08-05T17:02:56.108+0800 I CONTROL  [main] Service 'MongoDB' removed

 

 

 

 

 mongodb-win32-x86_64-2008plus-3.4.24-signed.msi