学英语学压测：02jmeter组件-测试计划和线程组ramp-up参数的作用

📢📢📢：先看关键单词，再看英文，最后看中文总结，再回头看一遍英文原文，效果更佳！！

关键词

Functional Testing	功能测试	[ˈfʌŋkʃənəl ˈtɛstɪŋ]
Sample	样本	[ˈsæmpəl]
Listeners	监听器	[ˈlɪsənərz]
Consequence	后果	[ˈkɒnsɪkwəns]
Performance	性能	[pərˈfɔːrməns]
Stress-testing	压力测试	[strɛs ˈtɛstɪŋ]
Controllers	控制器	[kənˈtroʊlərz]
Samplers	取样器	[ˈsæmplərz]
Concurrent	并发的	[kənˈkɜːrənt]
Duration	持续时间	[djuˈreɪʃən]
Startup Delay	启动延迟	[ˈstɑːrtʌp dɪˈleɪ]

测试计划：

A test plan describes a series of steps JMeter will execute when run. A complete test plan will consist of one or more Thread Groups, logic controllers, sample generating controllers, listeners, timers, assertions, and configuration elements.

The Test Plan object has a checkbox called "Functional Testing". If selected, it will cause JMeter to record the data returned from the server for each sample. If you have selected a file in your test listeners, this data will be written to file. This can be useful if you are doing a small run to ensure that JMeter is configured correctly, and that your server is returning the expected results. The consequence is that the file will grow huge quickly, and JMeter's performance will suffer. This option should be off if you are doing stress-testing (it is off by default).

If you are not recording the data to file, this option makes no difference.

You can also use the Configuration button on a listener to decide what fields to save.

线程组

Thread group elements are the beginning points of any test plan. All controllers and samplers must be under a thread group. Other elements, e.g. Listeners, may be placed directly under the test plan, in which case they will apply to all the thread groups. As the name implies, the thread group element controls the number of threads JMeter will use to execute your test. The controls for a thread group allow you to:

Set the number of threads
Set the ramp-up period
Set the number of times to execute the test

Each thread will execute the test plan in its entirety and completely independently of other test threads. Multiple threads are used to simulate concurrent connections to your server application.

The ramp-up period tells JMeter how long to take to "ramp-up" to the full number of threads chosen. If 10 threads are used, and the ramp-up period is 100 seconds, then JMeter will take 100 seconds to get all 10 threads up and running. Each thread will start 10 (100/10) seconds after the previous thread was begun. If there are 30 threads and a ramp-up period of 120 seconds, then each successive thread will be delayed by 4 seconds.

Ramp-up needs to be long enough to avoid too large a work-load at the start of a test, and short enough that the last threads start running before the first ones finish (unless one wants that to happen).

Start with Ramp-up = number of threads and adjust up or down as needed.

By default, the thread group is configured to loop once through its elements.

Thread Group also allows to specify Thread lifetime. Click the checkbox at the bottom of the Thread Group panel to enable/disable extra fields in which you can enter the duration of test and the startup delay You can configure Duration (seconds) and Startup Delay (seconds) to control the duration of each thread group and the after how much seconds it starts. When the test is started, JMeter will wait Startup Delay (seconds) before starting the Threads of the Thread Group and run for the configured Duration (seconds) time.