Linux-ubuntu点LED灯C语言版

​

一，C语言点灯

1.寄存器配置

设置为SVC模式，复用寄存器设置GPIO1-IO003,设置电气属性，设置为输出模式。

2.软件

汇编语言对模式设置，并且将堆栈指针指向主程序：

.global _start

_start:
/*设置为svr模式 */
    mrs r0,cpsr /*读取cpsr现在状态 */
    bic r0,r0,#0x1f
    orr r0,r0,#0x13
    msr cpsr,r0
/*SP堆栈指针 */
    ldr sp,=0x80200000
    b main

对寄存器进行配置：

#ifndef _MAIN_H
#define _MAIN_H

/*定义寄存器*/

#define CCMCCGR0 *((volatile unsigned int*)0x020c4068) //打开时钟
#define CCMCCGR1 *((volatile unsigned int*)0x020c406c) //打开时钟
#define CCMCCGR2 *((volatile unsigned int*)0x020c4070) //打开时钟
#define CCMCCGR3 *((volatile unsigned int*)0x020c4074) //打开时钟
#define CCMCCGR4 *((volatile unsigned int*)0x020c4078) //打开时钟
#define CCMCCGR5 *((volatile unsigned int*)0x020c407c) //打开时钟
#define CCMCCGR6 *((volatile unsigned int*)0x020c4080) //打开时钟

#define MUX_CTL_PAD *((volatile unsigned int*)0x020e0068)//复用功能
#define PAD_CTL_PAD *((volatile unsigned int*)0x020e02f4)//电器属性
#define GDIR *((volatile unsigned int*)0x0209c004)//输入输出
#define DR *((volatile unsigned int*)0x0209c000) //高低电平 

#endif

主程序：

#include "main.h"
void led_clock(void)//开启外部时钟
{
    CCMCCGR0 = 0xffffffff;
    CCMCCGR1 = 0xffffffff;
    CCMCCGR2 = 0xffffffff;
    CCMCCGR3 = 0xffffffff;
    CCMCCGR4 = 0xffffffff;
    CCMCCGR5 = 0xffffffff;
    CCMCCGR6 = 0xffffffff;
}
void led_init(void)
{
    MUX_CTL_PAD = 0x5;
    PAD_CTL_PAD = 0x10B0;
    GDIR = 0x8;
    DR = 0x0;
}
void delay_us(volatile unsigned int n)
{
    while(n--)
    {}
}
void delay_1ms(volatile unsigned int n)
{
    while(n--)
    {
       delay_us(0x7ff);
    }
}
void led_on(void)
{
    DR &= ~(1<<3);
}
void led_off(void)
{
    DR |= (1<<3);
}
int main(void)
{
    led_clock();
    led_init();
    while(1)
    {
        led_on();
        delay_1ms(500);
        led_off();
        delay_1ms(500);
    }
    return 0;    
}

执行，先根据编译顺序，将汇编的放在前面，将主函数放在后面，程序地址放在87800000，text程序段，先说明顺序，再说明数据段格式，最后是全局变量或者局部变量初始化但是未定义段bss，正常删除即可。

SECTIONS{
    . = 0X87800000;
    .text :
    {
        start.o
        main.o
        *(.text)
    }
    .rodata ALIGN(4) : {*(.rodata*)}
    .data ALIGN(4) : { *(.data) }
    __bss_start=.;
    .bss ALIGN(4) : { *(.bss) *(COMMON) }
    __bss_end=.;
}

Mkefile文件： @ − 设置的目标文件比如对 m a i n . b i n : @-设置的目标文件比如对main.bin : @−设置的目标文件比如对main.bin:(objects)这部分， @ 就是指 m a i n . b i n ， @就是指main.bin， @就是指main.bin，^-依赖的所有文件，就是 ( o b j e c t s ) ，即 s t a r t . o 和 m a i n . o , (objects)，即start.o和main.o, (objects)，即start.o和main.o,<-依赖的第一个文件，start.o，如果针对%.o :%.S，就是后缀为.S的第一个文件。
对于-Wall,显示编译的过程， -nostdlib表示不依赖系统或者库的文件，防止定义的头文件和库里面一样，从而出现报错。

objects := start.o main.o
main.bin :$(objects)
	arm-linux-gnueabihf-ld -Timux6u.lds $^ -o main.elf
	arm-linux-gnueabihf-objcopy -O binary -S main.elf $@
	arm-linux-gnueabihf-objdump -D -m arm  main.elf > main.dis
%.o : %.s
	arm-linux-gnueabihf-gcc -Wall -nostdlib -c -o $@ $<
%.o : %.S
	arm-linux-gnueabihf-gcc -Wall -nostdlib -c -o $@ $<
%.o : %.c
	arm-linux-gnueabihf-gcc -Wall -nostdlib -c -o $@ $<
clean:
	rm -rf *.o main.bin main.elf main.dis main.imx
run:
	sudo ./uuu load.imx

先用：./imxdownload main.bin /dev/db,将main.bin变为mian.imx文件，再执行make run即可实现不用读卡器传输数据。这样可以生成bin文件的头文件，然后再用uuu通过USB数据线传输。

二，模仿stm32格式修改程序

针对stm32格式，主要就是修改头文件，将寄存器组用结构体来定义，然后给出寄存器组的首地址，将结构体和首地址结合起来，构成这个寄存器组。

#ifndef _IMX6U_H
#define _IMX6U_H
#define CCM_BASE                    (0x020c4000)//时钟寄存器的初地址
#define CCM_ANALOG_BASE				(0X020C8000)//暂时不用
#define IMUX_SW_MUX_BASE            (0x02e00044)//复用寄存器初始地址
#define IOMUX_SW_PAD_BASE			(0X020E0204)//电器属性
#define GPIO1_BASE                  (0x0209C000)
#define GPIO2_BASE                  (0x020A0000)
#define GPIO3_BASE                  (0x020A4000)
#define GPIO4_BASE                  (0x020A8000)
#define GPIO5_BASE                  (0x020AC000)
typedef struct
{
	volatile unsigned int CCR;
	volatile unsigned int CCDR;
	volatile unsigned int CSR;
	volatile unsigned int CCSR;
	volatile unsigned int CACRR;
	volatile unsigned int CBCDR;
	volatile unsigned int CBCMR;
	volatile unsigned int CSCMR1;
	volatile unsigned int CSCMR2;
	volatile unsigned int CSCDR1;
	volatile unsigned int CS1CDR;
	volatile unsigned int CS2CDR;
	volatile unsigned int CDCDR;
	volatile unsigned int CHSCCDR;
	volatile unsigned int CSCDR2;
	volatile unsigned int CSCDR3;	
	volatile unsigned int RESERVED_1[2];
	volatile unsigned int CDHIPR;  
	volatile unsigned int RESERVED_2[2];
	volatile unsigned int CLPCR;
	volatile unsigned int CISR;
	volatile unsigned int CIMR;
	volatile unsigned int CCOSR;
	volatile unsigned int CGPR;
	volatile unsigned int CCGR0;
	volatile unsigned int CCGR1;
	volatile unsigned int CCGR2;
	volatile unsigned int CCGR3;
	volatile unsigned int CCGR4;
	volatile unsigned int CCGR5;
	volatile unsigned int CCGR6;
	volatile unsigned int RESERVED_3[1];
	volatile unsigned int CMEOR;	

}CCM_Type;//时钟寄存器相关
typedef struct 
{
	volatile unsigned int PLL_ARM;
	volatile unsigned int PLL_ARM_SET;
	volatile unsigned int PLL_ARM_CLR;
	volatile unsigned int PLL_ARM_TOG;
	volatile unsigned int PLL_USB1;
	volatile unsigned int PLL_USB1_SET;
	volatile unsigned int PLL_USB1_CLR;
	volatile unsigned int PLL_USB1_TOG;
	volatile unsigned int PLL_USB2;
	volatile unsigned int PLL_USB2_SET;
	volatile unsigned int PLL_USB2_CLR;
	volatile unsigned int PLL_USB2_TOG;
	volatile unsigned int PLL_SYS;
	volatile unsigned int PLL_SYS_SET;
	volatile unsigned int PLL_SYS_CLR;
	volatile unsigned int PLL_SYS_TOG;
	volatile unsigned int PLL_SYS_SS;
	volatile unsigned int RESERVED_1[3];
	volatile unsigned int PLL_SYS_NUM;
	volatile unsigned int RESERVED_2[3];
	volatile unsigned int PLL_SYS_DENOM; 
	volatile unsigned int RESERVED_3[3];
	volatile unsigned int PLL_AUDIO;
	volatile unsigned int PLL_AUDIO_SET;
	volatile unsigned int PLL_AUDIO_CLR;
	volatile unsigned int PLL_AUDIO_TOG;
	volatile unsigned int PLL_AUDIO_DENOM;
	volatile unsigned int RESERVED_4[3];
	volatile unsigned int PLL_VIDEO;
	volatile unsigned int PLL_VIDEO_SET;
	volatile unsigned int PLL_VIDEO_CLR;
	volatile unsigned int PLL_VIDEO_TOG;
	volatile unsigned int PLL_VIDEO_NUM;
	volatile unsigned int RESERVED_5[3];
	volatile unsigned int PLL_VIDEO_DENOM;
	volatile unsigned int RESERVED_6[7];
	volatile unsigned int PLL_ENET;
	volatile unsigned int PLL_ENET_SET;
	volatile unsigned int PLL_ENET_CLR;
	volatile unsigned int PLL_ENET_TOG;
	volatile unsigned int PFD_480;
	volatile unsigned int PFD_480_SET;
	volatile unsigned int PFD_480_CLR;
	volatile unsigned int PFD_480_TOG;
	volatile unsigned int PFD_528;
	volatile unsigned int PFD_528_SET;
	volatile unsigned int PFD_528_CLR;
	volatile unsigned int PFD_528_TOG;
	volatile unsigned int RESERVED_7[16];
	volatile unsigned int MISC0;
	volatile unsigned int MISC0_SET;
	volatile unsigned int MISC0_CLR;
	volatile unsigned int MISC0_TOG;
	volatile unsigned int MISC1;
	volatile unsigned int MISC1_SET;
	volatile unsigned int MISC1_CLR;
	volatile unsigned int MISC1_TOG;
	volatile unsigned int MISC2;
	volatile unsigned int MISC2_SET;
	volatile unsigned int MISC2_CLR;
	volatile unsigned int MISC2_TOG;
} CCM_ANALOG_Type;
typedef struct 
{
	volatile unsigned int BOOT_MODE0;
	volatile unsigned int BOOT_MODE1;
	volatile unsigned int SNVS_TAMPER0;
	volatile unsigned int SNVS_TAMPER1;
	volatile unsigned int SNVS_TAMPER2;
	volatile unsigned int SNVS_TAMPER3;
	volatile unsigned int SNVS_TAMPER4;
	volatile unsigned int SNVS_TAMPER5;
	volatile unsigned int SNVS_TAMPER6;
	volatile unsigned int SNVS_TAMPER7;
	volatile unsigned int SNVS_TAMPER8;
	volatile unsigned int SNVS_TAMPER9;
	volatile unsigned int JTAG_MOD;
	volatile unsigned int JTAG_TMS;
	volatile unsigned int JTAG_TDO;
	volatile unsigned int JTAG_TDI;
	volatile unsigned int JTAG_TCK;
	volatile unsigned int JTAG_TRST_B;
	volatile unsigned int GPIO1_IO00;
	volatile unsigned int GPIO1_IO01;
	volatile unsigned int GPIO1_IO02;
	volatile unsigned int GPIO1_IO03;
	volatile unsigned int GPIO1_IO04;
	volatile unsigned int GPIO1_IO05;
	volatile unsigned int GPIO1_IO06;
	volatile unsigned int GPIO1_IO07;
	volatile unsigned int GPIO1_IO08;
	volatile unsigned int GPIO1_IO09;
	volatile unsigned int UART1_TX_DATA;
	volatile unsigned int UART1_RX_DATA;
	volatile unsigned int UART1_CTS_B;
	volatile unsigned int UART1_RTS_B;
	volatile unsigned int UART2_TX_DATA;
	volatile unsigned int UART2_RX_DATA;
	volatile unsigned int UART2_CTS_B;
	volatile unsigned int UART2_RTS_B;
	volatile unsigned int UART3_TX_DATA;
	volatile unsigned int UART3_RX_DATA;
	volatile unsigned int UART3_CTS_B;
	volatile unsigned int UART3_RTS_B;
	volatile unsigned int UART4_TX_DATA;
	volatile unsigned int UART4_RX_DATA;
	volatile unsigned int UART5_TX_DATA;
	volatile unsigned int UART5_RX_DATA;
	volatile unsigned int ENET1_RX_DATA0;
	volatile unsigned int ENET1_RX_DATA1;
	volatile unsigned int ENET1_RX_EN;
	volatile unsigned int ENET1_TX_DATA0;
	volatile unsigned int ENET1_TX_DATA1;
	volatile unsigned int ENET1_TX_EN;
	volatile unsigned int ENET1_TX_CLK;
	volatile unsigned int ENET1_RX_ER;
	volatile unsigned int ENET2_RX_DATA0;
	volatile unsigned int ENET2_RX_DATA1;
	volatile unsigned int ENET2_RX_EN;
	volatile unsigned int ENET2_TX_DATA0;
	volatile unsigned int ENET2_TX_DATA1;
	volatile unsigned int ENET2_TX_EN;
	volatile unsigned int ENET2_TX_CLK;
	volatile unsigned int ENET2_RX_ER;
	volatile unsigned int LCD_CLK;
	volatile unsigned int LCD_ENABLE;
	volatile unsigned int LCD_HSYNC;
	volatile unsigned int LCD_VSYNC;
	volatile unsigned int LCD_RESET;
	volatile unsigned int LCD_DATA00;
	volatile unsigned int LCD_DATA01;
	volatile unsigned int LCD_DATA02;
	volatile unsigned int LCD_DATA03;
	volatile unsigned int LCD_DATA04;
	volatile unsigned int LCD_DATA05;
	volatile unsigned int LCD_DATA06;
	volatile unsigned int LCD_DATA07;
	volatile unsigned int LCD_DATA08;
	volatile unsigned int LCD_DATA09;
	volatile unsigned int LCD_DATA10;
	volatile unsigned int LCD_DATA11;
	volatile unsigned int LCD_DATA12;
	volatile unsigned int LCD_DATA13;
	volatile unsigned int LCD_DATA14;
	volatile unsigned int LCD_DATA15;
	volatile unsigned int LCD_DATA16;
	volatile unsigned int LCD_DATA17;
	volatile unsigned int LCD_DATA18;
	volatile unsigned int LCD_DATA19;
	volatile unsigned int LCD_DATA20;
	volatile unsigned int LCD_DATA21;
	volatile unsigned int LCD_DATA22;
	volatile unsigned int LCD_DATA23;
	volatile unsigned int NAND_RE_B;
	volatile unsigned int NAND_WE_B;
	volatile unsigned int NAND_DATA00;
	volatile unsigned int NAND_DATA01;
	volatile unsigned int NAND_DATA02;
	volatile unsigned int NAND_DATA03;
	volatile unsigned int NAND_DATA04;
	volatile unsigned int NAND_DATA05;
	volatile unsigned int NAND_DATA06;
	volatile unsigned int NAND_DATA07;
	volatile unsigned int NAND_ALE;
	volatile unsigned int NAND_WP_B;
	volatile unsigned int NAND_READY_B;
	volatile unsigned int NAND_CE0_B;
	volatile unsigned int NAND_CE1_B;
	volatile unsigned int NAND_CLE;
	volatile unsigned int NAND_DQS;
	volatile unsigned int SD1_CMD;
	volatile unsigned int SD1_CLK;
	volatile unsigned int SD1_DATA0;
	volatile unsigned int SD1_DATA1;
	volatile unsigned int SD1_DATA2;
	volatile unsigned int SD1_DATA3;
	volatile unsigned int CSI_MCLK;
	volatile unsigned int CSI_PIXCLK;
	volatile unsigned int CSI_VSYNC;
	volatile unsigned int CSI_HSYNC;
	volatile unsigned int CSI_DATA00;
	volatile unsigned int CSI_DATA01;
	volatile unsigned int CSI_DATA02;
	volatile unsigned int CSI_DATA03;
	volatile unsigned int CSI_DATA04;
	volatile unsigned int CSI_DATA05;
	volatile unsigned int CSI_DATA06;
	volatile unsigned int CSI_DATA07;
}IOMUX_SW_MUX_Type;
typedef struct 
{
	volatile unsigned int DRAM_ADDR00;
	volatile unsigned int DRAM_ADDR01;
	volatile unsigned int DRAM_ADDR02;
	volatile unsigned int DRAM_ADDR03;
	volatile unsigned int DRAM_ADDR04;
	volatile unsigned int DRAM_ADDR05;
	volatile unsigned int DRAM_ADDR06;
	volatile unsigned int DRAM_ADDR07;
	volatile unsigned int DRAM_ADDR08;
	volatile unsigned int DRAM_ADDR09;
	volatile unsigned int DRAM_ADDR10;
	volatile unsigned int DRAM_ADDR11;
	volatile unsigned int DRAM_ADDR12;
	volatile unsigned int DRAM_ADDR13;
	volatile unsigned int DRAM_ADDR14;
	volatile unsigned int DRAM_ADDR15;
	volatile unsigned int DRAM_DQM0;
	volatile unsigned int DRAM_DQM1;
	volatile unsigned int DRAM_RAS_B;
	volatile unsigned int DRAM_CAS_B;
	volatile unsigned int DRAM_CS0_B;
	volatile unsigned int DRAM_CS1_B;
	volatile unsigned int DRAM_SDWE_B;
	volatile unsigned int DRAM_ODT0;
	volatile unsigned int DRAM_ODT1;
	volatile unsigned int DRAM_SDBA0;
	volatile unsigned int DRAM_SDBA1;
	volatile unsigned int DRAM_SDBA2;
	volatile unsigned int DRAM_SDCKE0;
	volatile unsigned int DRAM_SDCKE1;
	volatile unsigned int DRAM_SDCLK0_P;
	volatile unsigned int DRAM_SDQS0_P;
	volatile unsigned int DRAM_SDQS1_P;
	volatile unsigned int DRAM_RESET;
	volatile unsigned int TEST_MODE;
	volatile unsigned int POR_B;
	volatile unsigned int ONOFF;
	volatile unsigned int SNVS_PMIC_ON_REQ;
	volatile unsigned int CCM_PMIC_STBY_REQ;
	volatile unsigned int BOOT_MODE0;
	volatile unsigned int BOOT_MODE1;
	volatile unsigned int SNVS_TAMPER0;
	volatile unsigned int SNVS_TAMPER1;
	volatile unsigned int SNVS_TAMPER2;
	volatile unsigned int SNVS_TAMPER3;
	volatile unsigned int SNVS_TAMPER4;
	volatile unsigned int SNVS_TAMPER5;
	volatile unsigned int SNVS_TAMPER6;
	volatile unsigned int SNVS_TAMPER7;
	volatile unsigned int SNVS_TAMPER8;
	volatile unsigned int SNVS_TAMPER9;
	volatile unsigned int JTAG_MOD;
	volatile unsigned int JTAG_TMS;
	volatile unsigned int JTAG_TDO;
	volatile unsigned int JTAG_TDI;
	volatile unsigned int JTAG_TCK;
	volatile unsigned int JTAG_TRST_B;
	volatile unsigned int GPIO1_IO00;
	volatile unsigned int GPIO1_IO01;
	volatile unsigned int GPIO1_IO02;
	volatile unsigned int GPIO1_IO03;
	volatile unsigned int GPIO1_IO04;
	volatile unsigned int GPIO1_IO05;
	volatile unsigned int GPIO1_IO06;
	volatile unsigned int GPIO1_IO07;
	volatile unsigned int GPIO1_IO08;
	volatile unsigned int GPIO1_IO09;
	volatile unsigned int UART1_TX_DATA;
	volatile unsigned int UART1_RX_DATA;
	volatile unsigned int UART1_CTS_B;
	volatile unsigned int UART1_RTS_B;
	volatile unsigned int UART2_TX_DATA;
	volatile unsigned int UART2_RX_DATA;
	volatile unsigned int UART2_CTS_B;
	volatile unsigned int UART2_RTS_B;
	volatile unsigned int UART3_TX_DATA;
	volatile unsigned int UART3_RX_DATA;
	volatile unsigned int UART3_CTS_B;
	volatile unsigned int UART3_RTS_B;
	volatile unsigned int UART4_TX_DATA;
	volatile unsigned int UART4_RX_DATA;
	volatile unsigned int UART5_TX_DATA;
	volatile unsigned int UART5_RX_DATA;
	volatile unsigned int ENET1_RX_DATA0;
	volatile unsigned int ENET1_RX_DATA1;
	volatile unsigned int ENET1_RX_EN;
	volatile unsigned int ENET1_TX_DATA0;
	volatile unsigned int ENET1_TX_DATA1;
	volatile unsigned int ENET1_TX_EN;
	volatile unsigned int ENET1_TX_CLK;
	volatile unsigned int ENET1_RX_ER;
	volatile unsigned int ENET2_RX_DATA0;
	volatile unsigned int ENET2_RX_DATA1;
	volatile unsigned int ENET2_RX_EN;
	volatile unsigned int ENET2_TX_DATA0;
	volatile unsigned int ENET2_TX_DATA1;
	volatile unsigned int ENET2_TX_EN;
	volatile unsigned int ENET2_TX_CLK;
	volatile unsigned int ENET2_RX_ER;
	volatile unsigned int LCD_CLK;
	volatile unsigned int LCD_ENABLE;
	volatile unsigned int LCD_HSYNC;
	volatile unsigned int LCD_VSYNC;
	volatile unsigned int LCD_RESET;
	volatile unsigned int LCD_DATA00;
	volatile unsigned int LCD_DATA01;
	volatile unsigned int LCD_DATA02;
	volatile unsigned int LCD_DATA03;
	volatile unsigned int LCD_DATA04;
	volatile unsigned int LCD_DATA05;
	volatile unsigned int LCD_DATA06;
	volatile unsigned int LCD_DATA07;
	volatile unsigned int LCD_DATA08;
	volatile unsigned int LCD_DATA09;
	volatile unsigned int LCD_DATA10;
	volatile unsigned int LCD_DATA11;
	volatile unsigned int LCD_DATA12;
	volatile unsigned int LCD_DATA13;
	volatile unsigned int LCD_DATA14;
	volatile unsigned int LCD_DATA15;
	volatile unsigned int LCD_DATA16;
	volatile unsigned int LCD_DATA17;
	volatile unsigned int LCD_DATA18;
	volatile unsigned int LCD_DATA19;
	volatile unsigned int LCD_DATA20;
	volatile unsigned int LCD_DATA21;
	volatile unsigned int LCD_DATA22;
	volatile unsigned int LCD_DATA23;
	volatile unsigned int NAND_RE_B;
	volatile unsigned int NAND_WE_B;
	volatile unsigned int NAND_DATA00;
	volatile unsigned int NAND_DATA01;
	volatile unsigned int NAND_DATA02;
	volatile unsigned int NAND_DATA03;
	volatile unsigned int NAND_DATA04;
	volatile unsigned int NAND_DATA05;
	volatile unsigned int NAND_DATA06;
	volatile unsigned int NAND_DATA07;
	volatile unsigned int NAND_ALE;
	volatile unsigned int NAND_WP_B;
	volatile unsigned int NAND_READY_B;
	volatile unsigned int NAND_CE0_B;
	volatile unsigned int NAND_CE1_B;
	volatile unsigned int NAND_CLE;
	volatile unsigned int NAND_DQS;
	volatile unsigned int SD1_CMD;
	volatile unsigned int SD1_CLK;
	volatile unsigned int SD1_DATA0;
	volatile unsigned int SD1_DATA1;
	volatile unsigned int SD1_DATA2;
	volatile unsigned int SD1_DATA3;
	volatile unsigned int CSI_MCLK;
	volatile unsigned int CSI_PIXCLK;
	volatile unsigned int CSI_VSYNC;
	volatile unsigned int CSI_HSYNC;
	volatile unsigned int CSI_DATA00;
	volatile unsigned int CSI_DATA01;
	volatile unsigned int CSI_DATA02;
	volatile unsigned int CSI_DATA03;
	volatile unsigned int CSI_DATA04;
	volatile unsigned int CSI_DATA05;
	volatile unsigned int CSI_DATA06;
	volatile unsigned int CSI_DATA07;
	volatile unsigned int GRP_ADDDS;
	volatile unsigned int GRP_DDRMODE_CTL;
	volatile unsigned int GRP_B0DS;
	volatile unsigned int GRP_DDRPK;
	volatile unsigned int GRP_CTLDS;
	volatile unsigned int GRP_B1DS;
	volatile unsigned int GRP_DDRHYS;
	volatile unsigned int GRP_DDRPKE;
	volatile unsigned int GRP_DDRMODE;
	volatile unsigned int GRP_DDR_TYPE;
}IOMUX_SW_PAD_Type;

typedef struct 
{
	volatile unsigned int DR;							
	volatile unsigned int GDIR; 							
	volatile unsigned int PSR;								
	volatile unsigned int ICR1; 							
	volatile unsigned int ICR2; 							 
	volatile unsigned int IMR;								 
	volatile unsigned int ISR;			
	volatile unsigned int EDGE_SEL;  
}GPIO_Type;

#define CCM ((CCM_Type *)CCM_BASE)
#define CCM_ANALOG ((CCM_ANALOG_Type *)CCM_ANALOG_BASE)
#define IOMUX_SW_MUX ((IOMUX_SW_MUX_Type *)IMUX_SW_MUX_BASE)
#define IOMUX_SW_PAD ((IOMUX_SW_PAD_Type *)IOMUX_SW_PAD_BASE)
#define GPIO1 ((GPIO_Type *)GPIO1_BASE)
#define GPIO2 ((GPIO_Type *)GPIO2_BASE)
#endif

比如：#define CCM_BASE (0x020c4000)//时钟寄存器的初地址
#define CCM ((CCM_Type )CCM_BASE)，将首地址CCM_BASE定义为CCM_Type 结构体类型指针（强制类型转换），然后宏定义为CCM，调用其中的寄存器比如CCM->CCGR0。通常用于将一个特定的内存地址（这里是 CCM_BASE）映射为一个指向特定结构体类型（CCM_Type）的指针。(CCM_Type)：这是一个类型转换操作，将 CCM_BASE 的值（通常是一个内存地址常量，比如十六进制表示的某个地址）强制转换为指向 CCM_Type 结构体类型的指针。意味着后续可以像访问结构体成员那样去访问和操作对应的硬件资源了。

三，镜像头文件和板子读写程序方式

1.启动方式

通过BOOT_MODE1和BOOT_MODE0决定启动方式，对应拨码开关1和2：
在这里插入图片描述 在这里插入图片描述
串行下载：连接OTG接口，通过 USB口向开发板上的 SD/EMMC、NAND 等存储设备下载代码。
内部BOOT模式：，芯片会执行内部的 boot ROM 代码，这段 boot ROM 代码会进行硬件初始化(一部分外设)，然后从 boot 设备(就是存放代码的设备、比如 SD/EMMC、NAND)中将代码拷贝出来复制到指定的 RAM 中，一般是 DDR。

2.镜像的头文件

main.imx和main.bin文件的区别就是main.imx比bin多了头文件，头文件包①IVT②BOOT DATA③DCD，大小为4kbyte，其中3kbyte为①②③，1kbyte的偏移地址。最终烧写到 I.MX6U 中的程序其组成为：IVT+Boot data+DCD+.bin。内部 Boot ROM 会将 main.imx 拷贝到 DDR 中,main.imx 在 DDR 中的起始地址就是 0X87800000-
3072=0X877FF400。

①IVT

IVT，IVT 包含了镜像程序的入口点、指向 DCD 的指针和一些用作其它用途的指针。
在这里插入图片描述在这里插入图片描述

②BOOT DATA

在这里插入图片描述

③DCD

寄存器地址和对应的配置信息集合，Boot ROM 会使用这些寄存器地址和配置集合来初始化相应的寄存器，比如开启某些外设的时钟、初始化 DDR 等等。
在这里插入图片描述

​

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：/a/938504.html

如若内容造成侵权/违法违规/事实不符，请联系我们进行投诉反馈qq邮箱809451989@qq.com，一经查实，立即删除！

相关文章

SLM510A系列——24V，15到150mA单通道可调电流线性恒流LED驱动芯片

SLM510A系列——24V，15到150mA单通道可调电流线性恒流LED驱动芯片

SLM510A 系列产品是单通道、高精度、可调电流线性恒流源的 LED 驱动芯片&#xff0c;在各种 LED 照明产品中非常简单易用。其在宽电压输入范围内&#xff0c;能保证极高的输出电流精度&#xff0c;从而在大面积的光源照明中&#xff0c;都能让 LED 照明亮度保持均匀一致。 由于…
阅读更多...
【JavaEE】网络（2）

【JavaEE】网络（2）

一、网络编程套接字 1.1 基础概念 【网络编程】指网络上的主机&#xff0c;通过不同的进程&#xff0c;以编程的方式实现网络通信&#xff1b;当然&#xff0c;我们只要满足进程不同就行&#xff0c;所以即便是同一个主机&#xff0c;只要是不同进程&#xff0c;基于网络来传…
阅读更多...
【Java数据类型学习——String】

【Java数据类型学习——String】

&#x1f308;个人主页: Aileen_0v0 &#x1f525;热门专栏: 华为鸿蒙系统学习|计算机网络|数据结构与算法 ​&#x1f4ab;个人格言:“没有罗马,那就自己创造罗马~” 文章目录 打印字符串长度的两种方法字符串String的比较1.用于比较引用的对象是否指向同一个内存地址2.用equa…
阅读更多...
基于Spring Boot的校园部门资料管理系统

基于Spring Boot的校园部门资料管理系统

一、系统背景与目的 随着信息技术的飞速发展&#xff0c;校园信息化建设成为必然趋势。学校各部门在日常工作中积累了大量的资料&#xff0c;包括教学资料、学生档案、科研成果、行政文件等。传统的纸质资料管理方式存在效率低、易丢失、难以检索等问题&#xff0c;无法满足现…
阅读更多...
STL 剖析

STL 剖析

STL 六大组件 「STL 六大组件的交互关系」 Container 通过 Allocator 取得数据储存空间Algorithm 通过 Iterator 存取 Container 内容Functor 可以协助 Algorithm 完成不同的策略变化Adapter 可以修饰或套接 Functor、Iterator 配置器(allocator) 配置器&#xff1a;负责空间…
阅读更多...
企业网络构建：如何满足业务需求与提升效率

企业网络构建：如何满足业务需求与提升效率

企业组网指通过网络将企业内部的各种设备&#xff08;如电脑、打印机和服务器等&#xff09;连接起来&#xff0c;实现资源共享、信息交流与协同办公的过程。要打造一个高效的企业网络&#xff0c;需要从安全性、可靠性、稳定性和性能等多个方面进行综合考虑。以下内容将详细解…
阅读更多...
升级thinkphp8最新版本，升级后发现版本不变

升级thinkphp8最新版本，升级后发现版本不变

升级thinkphp8.0.3最新版本8.1.1&#xff0c;升级后发现版本不变&#xff0c; 更新TP有两个方法 1 全部更新(所有插件都一起更新) composer update 2 只更新TP框架核心 composer update topthink/framework 造成可能有两个原因&#xff0c;一是缓存问题&#xff0c;二是更新…
阅读更多...
Cesium进阶教程——自定义图形、外观、绘图基础、现有着色器移植至Cesium、ShadowMapping、视频GIS、模型压平、卷帘

Cesium进阶教程——自定义图形、外观、绘图基础、现有着色器移植至Cesium、ShadowMapping、视频GIS、模型压平、卷帘

基础必看 WEBGL基础&#xff08;从渲染管线角度解读&#xff09; 参考路线 http://www.xt3d.online/tutorial/further/article.html 自定义图形 https://blog.csdn.net/m0_55049655/article/details/138908327 https://blog.csdn.net/m0_55049655/article/details/140306837 …
阅读更多...
理解数据结构 hashtable的简易理解思路

理解数据结构 hashtable的简易理解思路

结构图 为了方便演示&#xff0c;下图中分区算法为下标取模 private int hashFun(int id) {//使用 hash并取模return id % size;}Hashtable的结构如图所示&#xff1a;是一个数组&#xff08;元素为各个链表的表头&#xff09; 多个链表组成&#xff0c;也就是说 hashtable 结…
阅读更多...
【YashanDB知识库】kettle同步PG至崖山提示no encryption pg_hba.conf记录

【YashanDB知识库】kettle同步PG至崖山提示no encryption pg_hba.conf记录

【问题分类】数据导入导出 【关键字】数据同步&#xff0c;kettle&#xff0c;数据迁移&#xff0c;pg_hba.conf 【问题描述】使用kettle同步postgresql至崖山数据库时提示以下报错信息&#xff1a; 【问题原因分析】pg_hba.conf 文件中没有正确配置允许从 IP 地址 连接到数…
阅读更多...
记录2024-leetcode-字符串DP

记录2024-leetcode-字符串DP

10. 正则表达式匹配 - 力扣&#xff08;LeetCode&#xff09;
阅读更多...
UE5制作伤害浮动数字

UE5制作伤害浮动数字

效果演示&#xff1a; 首先创建一个控件UI 添加画布和文本 文本设置样式 添加伤害浮动动画&#xff0c;根据自己喜好调整&#xff0c;我设置了缩放和不透明度 添加绑定 转到事件图表&#xff0c;事件构造设置动画 创建actor蓝图类 添加widget 获取位置 设置位移 创建一个被击中…
阅读更多...
【USB-HID】“自动化键盘“

【USB-HID】“自动化键盘“

这里写目录标题 【USB-HID】"自动化键盘"1. 前言2. 框架3. 实现3.1 模拟键盘按键输入 【USB-HID】“自动化键盘” 1. 前言 最近从朋友那了解了一种"自动化键盘"&#xff0c;能够通过上位机录制按键脚本&#xff0c;然后执行脚本&#xff0c;实现物理键盘…
阅读更多...
STM32F407ZGT6-UCOSIII笔记4：时间片轮转调度

STM32F407ZGT6-UCOSIII笔记4：时间片轮转调度

本文学习与程序编写基于 正点原子的 STM32F1 UCOS开发手册 编写熟悉一下 UCOSIII系统的 时间片轮转调度 文章提供测试代码讲解、完整工程下载、测试效果图 目录 解决上文的卡系统问题&#xff1a; 使能时间片轮转调度&#xff1a; 任务初始化定义更改&#xff1a; 文件结构…
阅读更多...
【Flask+OpenAI】利用Flask+OpenAI Key实现GPT4-智能AI对话接口demo - 从0到1手把手全教程（附源码）

【Flask+OpenAI】利用Flask+OpenAI Key实现GPT4-智能AI对话接口demo - 从0到1手把手全教程（附源码）

文章目录 前言环境准备安装必要的库 生成OpenAI API代码实现详解导入必要的模块创建Flask应用实例配置OpenAI API完整代码如下&#xff08;demo源码&#xff09;代码解析 利用Postman调用接口 了解更多AI内容结尾 前言 Flask作为一个轻量级的Python Web框架&#xff0c;凭借其…
阅读更多...
搭建springmvc项目

搭建springmvc项目

什么是springmvc MVC它是一种设计理念。把程序按照指定的结构来划分: Model模型 View视图 Controller控制层 springmvc框架是spring框架的一个分支。它是按照mvc架构思想设计的一款框架。 springmvc的主要作用: 接收浏览器的请求数据&#xff0c;对数据进行处理&#xff0c;…
阅读更多...
Three.js相机Camera控件知识梳理

Three.js相机Camera控件知识梳理

原文&#xff1a;https://juejin.cn/post/7231089453695238204?searchId20241217193043D32C9115C2057FE3AD64 1. 相机类型 Three.js 主要提供了两种类型的相机&#xff1a;正交相机&#xff08;OrthographicCamera&#xff09;和透视相机&#xff08;PerspectiveCamera&…
阅读更多...
为“行车大脑”降温：Simdroid-EC助力汽车ECU设计研发

为“行车大脑”降温：Simdroid-EC助力汽车ECU设计研发

ECU&#xff08;Electronic Control Unit&#xff0c;电子控制单元&#xff09;被誉为汽车的行车大脑&#xff0c;在工作时会产生大量的热量&#xff0c;而其散热存在以下难题&#xff1a;一是工作环境恶劣&#xff0c;ECU常处于高温环境中&#xff1b;二是ECU所处的空间较为狭…
阅读更多...
改进系列（6）：基于DenseNet网络添加TripletAttention注意力层实现的番茄病害图像分类

改进系列（6）：基于DenseNet网络添加TripletAttention注意力层实现的番茄病害图像分类

目录 1. DenseNet 介绍 2. TripletAttention 3. DenseNet TripletAttention 4. 番茄场景病害病虫识别 4.1 数据集情况 4.2 训练 4.3 训练结果 4.4 推理 1. DenseNet 介绍 DenseNet是一种深度学习架构&#xff0c;卷积神经网络&#xff08;CNN&#xff09;的一种变体&…
阅读更多...
Ubuntu 20.04LTS 系统离线安装5.7.44mysql数据库

Ubuntu 20.04LTS 系统离线安装5.7.44mysql数据库

Ubuntu 20.04LTS 系统离线安装5.7.44mysql数据库 环境下载 MySQL 5.7.44 包安装标题检查服务是否启动成功遇到的问题登陆&修改密码&远程访问 环境 操作系统&#xff1a;Ubuntu 20.04.4 LTS 数据库&#xff1a;MySQL 5.7.34 内核版本&#xff1a;x86_64&#xff08;amd…
阅读更多...
最新文章

Copyright @ 2022~2023