通过超声波模块与小车结合，实现小车超声波避障。确保小车接线已安装，且安装正确。

        通过超声波来获取小车与障碍物的距离。当检测到小车与障碍物的距离小于我们的设置的距离时，小车左旋避开障碍物。

运行代码如下所示：

from LOBOROBOT import LOBOROBOT  # 载入机器人库
import RPi.GPIO as GPIO
import time

BtnPin  = 19
Gpin    = 5
Rpin    = 6

TRIG = 20
ECHO = 21

clbrobot = LOBOROBOT() # 实例化机器人对象
        
def keysacn():
    val = GPIO.input(BtnPin)
    while GPIO.input(BtnPin) == False:
        val = GPIO.input(BtnPin)
    while GPIO.input(BtnPin) == True:
        time.sleep(0.01)
        val = GPIO.input(BtnPin)
        if val == True:
            GPIO.output(Rpin,1)
            while GPIO.input(BtnPin) == False:
                GPIO.output(Rpin,0)
        else:
            GPIO.output(Rpin,0)
            
def setup():
        GPIO.setwarnings(False)
        GPIO.setmode(GPIO.BCM)
        GPIO.setup(TRIG, GPIO.OUT)
        GPIO.setup(ECHO, GPIO.IN)
        
        GPIO.setup(Gpin, GPIO.OUT)     # Set Green Led Pin mode to output
        GPIO.setup(Rpin, GPIO.OUT)     # Set Red Led Pin mode to output
        GPIO.setup(BtnPin, GPIO.IN, pull_up_down=GPIO.PUD_UP)    # Set BtnPin's mode is input, and pull up to high level(3.3V)


def distance():
    GPIO.output(TRIG, 0)
    time.sleep(0.000002)
    
    GPIO.output(TRIG, 1)
    time.sleep(0.00001)
    GPIO.output(TRIG, 0)
    while GPIO.input(ECHO) == 0:
        a = 0
    time1 = time.time()
    while GPIO.input(ECHO) == 1:
        a = 1
    time2 = time.time()
    during = time2 - time1    
    time.sleep(0.2)
    return round(during * 340 / 2 * 100)

def loop():
        while True:
            dis = distance()
            if (dis < 40) == True:
                while (dis < 40) == True:
                    clbrobot.t_down(50,0.5)
                    clbrobot.turnRight(50,0.1)
                    dis = distance()
            else:
                clbrobot.t_up(50,0)
            
            print(dis, 'cm')
            print('')

def destroy():
        clbrobot.t_stop(.1)
        GPIO.cleanup()

if __name__ == "__main__":
        setup()
        clbrobot.t_stop(.1)
        keysacn()
        try:
                loop()
        except KeyboardInterrupt:
                destroy()

        我们把小车放在地上，运行程序，小车会一直前进。当遇到前方有障碍物时且小于设置的距离时，小车会左旋避开障碍物。