openGauss_5.0.1 企业版安装及问题记录（CentOS系统）：主备模式服务器安装

目录

  • 📚第一章 官方地址
    • 📗安装包下载地址
    • 📗文档指南
  • 📚第二章 安装
    • 📗准备工作
    • 📗开始安装
      • 📕创建XML配置文件
      • 📕初始化安装环境
      • 📕执行安装
      • 📕验证
  • 📚第三章 安装总结
  • ⁉️问题记录
    • ❓问题一：执行gs_preinstall报错：Python 解释器在编译时未使用 -enable-shared 选项
      • ❗解决方式：重新安装python,放开--enable-shared
    • ❓问题二：No module named '_ctypes'
      • ❗解决方式：安装libffi-devel
    • ❓问题三：libpython3.6m.so.1.0 未找到
      • ❗解决方式：重新安装python3.6（5.0版本只支持python3.6）
    • ❓问题四：Failed to read clusterName. Error:
      • ❗解决方式：配置不对
    • ❓问题五： Failed to obtain local instance information
      • ❗解决方式：修改主机名
    • ❓问题六：[GAUSS-51405] : You need to install software:expect
    • ❓问题七：[FAILURE] bigdata02:[GAUSS-51251] : The /home/opengauss/app cannot be a root user group or a lin
    • ❓问题八：[GAUSS-51405] : You need to install software:['bzip2']

🔼下一集：openGauss_5.1.0 企业版快速安装及数据库连接：单节点容器化安装

📚第一章 官方地址

📗安装包下载地址

https://opengauss.org/zh/download/
在这里插入图片描述
简单注册下账号，登录即可下载，注意对应的操作系统
在这里插入图片描述

📗文档指南

https://docs-opengauss.osinfra.cn/zh/docs/5.0.0/docs/InstallationGuide/InstallationGuide.html
在这里插入图片描述

📚第二章 安装

📗准备工作

关闭防火墙等配置，状态保持和下图一致
在这里插入图片描述

[root@localhost home]# less /etc/selinux/config

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected. 
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted 


[root@localhost home]# systemctl status firewalld 
● firewalld.service - firewalld - dynamic firewall daemon
   Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
   Active: inactive (dead)
     Docs: man:firewalld(1)
[root@localhost home]#

重新启动操作系统(谨慎操作，确保该机器上没有其它应用):

reboot

检查防火墙是否关闭(inactive (dead)):

systemctl status firewalld

关闭防火墙:

systemctl disable firewalld.service
systemctl stop firewalld.service

详见官网-准备软硬件安装环境章节，不同操作系统略存差异
在这里插入图片描述

📗开始安装

📕创建XML配置文件

按需创建目录（也可以直接根据官网的配置文件创建目录，省的修改配置文件了）

mkdir -p /home/opengauss/{app,log,tmp,tool,corefile,data}

创建并修改文件，参考如下，采用的一主一备配置,cluster_config.xml,内容如下：

<?xml version="1.0" encoding="UTF-8"?>
<ROOT>
    <!-- openGauss整体信息 -->
    <CLUSTER>
        <!-- 数据库名称 -->
        <PARAM name="openGaussDB" value="Cluster_template" />
        <!-- 数据库节点名称(hostname) -->
        <PARAM name="nodeNames" value="bigdata01,bigdata02" />
        <!-- 数据库安装目录-->
        <PARAM name="gaussdbAppPath" value="/home/opengauss/app" />
        <!-- 日志目录-->
        <PARAM name="gaussdbLogPath" value="/home/opengauss/log" />
        <!-- 临时文件目录-->
        <PARAM name="tmpMppdbPath" value="/home/opengauss/tmp"/>
        <!-- 数据库工具目录-->
        <PARAM name="gaussdbToolPath" value="/home/opengauss/tool" />
        <!-- 数据库core文件目录-->
        <PARAM name="corePath" value="/home/opengauss/corefile"/>
        <!-- 节点IP，与数据库节点名称列表一一对应 -->
        <PARAM name="backIp1s" value="192.168.2.10,192.168.2.11"/> 
    </CLUSTER>
    <!-- 每台服务器上的节点部署信息 -->
    <DEVICELIST>
        <!-- 节点1上的部署信息 -->
        <DEVICE sn="bigdata01">
            <!-- 节点1的主机名称 -->
            <PARAM name="name" value="bigdata01"/>
            <!-- 节点1所在的AZ及AZ优先级 -->
            <PARAM name="azName" value="AZ1"/>
            <PARAM name="azPriority" value="1"/>
            <!-- 节点1的IP，如果服务器只有一个网卡可用，将backIP1和sshIP1配置成同一个IP -->
            <PARAM name="backIp1" value="192.168.2.10"/>
            <PARAM name="sshIp1" value="10.0.2.10"/>
            
	    <!--dn-->
            <PARAM name="dataNum" value="1"/>
	    <PARAM name="dataPortBase" value="15400"/>
	    <PARAM name="dataNode1" value="/home/opengauss/data,bigdata02,/home/opengauss/data"/>
            <PARAM name="dataNode1_syncNum" value="0"/>
        </DEVICE>

        <!-- 节点2上的节点部署信息，其中“name”的值配置为主机名称 -->
        <DEVICE sn="bigdata02">
            <!-- 节点2的主机名称 -->
            <PARAM name="name" value="bigdata02"/>
            <!-- 节点2所在的AZ及AZ优先级 -->
            <PARAM name="azName" value="AZ1"/>
            <PARAM name="azPriority" value="1"/>
            <!-- 节点2的IP，如果服务器只有一个网卡可用，将backIP1和sshIP1配置成同一个IP -->
            <PARAM name="backIp1" value="192.168.2.11"/>
            <PARAM name="sshIp1" value="10.0.2.11"/>
	</DEVICE>
    </DEVICELIST>
</ROOT>

📕初始化安装环境

[root@localhost script]# python3.6 ./gs_preinstall -U omm -G dbgrp -X /opt/software/openGauss/cluster_config.xml  
Parsing the configuration file.
Successfully parsed the configuration file.
Installing the tools on the local node.
Successfully installed the tools on the local node.
Are you sure you want to create trust for root (yes/no)?yes
Please enter password for root
Please enter password for current user[root].
Password: 
Checking network information.
All nodes in the network are Normal.
Successfully checked network information.
Creating SSH trust.
Creating the local key file.
Successfully created the local key files.
Appending local ID to authorized_keys.
Successfully appended local ID to authorized_keys.
Updating the known_hosts file.
Successfully updated the known_hosts file.
Appending authorized_key on the remote node.
Successfully appended authorized_key on all remote node.
Checking common authentication file content.
Successfully checked common authentication content.
Distributing SSH trust file to all node.
Distributing trust keys file to all node successfully.
Successfully distributed SSH trust file to all node.
Verifying SSH trust on all hosts.
Successfully verified SSH trust on all hosts.
Successfully created SSH trust.
Successfully created SSH trust for the root permission user.
Setting host ip env
Successfully set host ip env.
Distributing package.
Begin to distribute package to tool path.
Successfully distribute package to tool path.
Begin to distribute package to package path.
Successfully distribute package to package path.
Successfully distributed package.
Are you sure you want to create the user[omm] and create trust for it (yes/no)? yes
Preparing SSH service.
Successfully prepared SSH service.
Installing the tools in the cluster.
Successfully installed the tools in the cluster.
Checking hostname mapping.
Successfully checked hostname mapping.
Creating SSH trust for [omm] user.
Please enter password for current user[omm].
Password: 
Checking network information.
All nodes in the network are Normal.
Successfully checked network information.
Creating SSH trust.
Creating the local key file.
Successfully created the local key files.
Appending local ID to authorized_keys.
Successfully appended local ID to authorized_keys.
Updating the known_hosts file.
Successfully updated the known_hosts file.
Appending authorized_key on the remote node.
Successfully appended authorized_key on all remote node.
Checking common authentication file content.
Successfully checked common authentication content.
Distributing SSH trust file to all node.
Distributing trust keys file to all node successfully.
Successfully distributed SSH trust file to all node.
Verifying SSH trust on all hosts.
Successfully verified SSH trust on all hosts.
Successfully created SSH trust.
Successfully created SSH trust for [omm] user.
Checking OS software.
Successfully check os software.
Checking OS version.
Successfully checked OS version.
Creating cluster's path.
Successfully created cluster's path.
Set and check OS parameter.
Setting OS parameters.
Successfully set OS parameters.
Warning: Installation environment contains some warning messages.
Please get more details by "/opt/software/openGauss/script/gs_checkos -i A -h bigdata01,bigdata02 --detail".
Set and check OS parameter completed.
Preparing CRON service.
Successfully prepared CRON service.
Setting user environmental variables.
Successfully set user environmental variables.
Setting the dynamic link library.
Successfully set the dynamic link library.
Setting Core file
Successfully set core path.
Setting pssh path
Successfully set pssh path.
Setting Cgroup.
Successfully set Cgroup.
Set ARM Optimization.
No need to set ARM Optimization.
Fixing server package owner.
Setting finish flag.
Successfully set finish flag.
Preinstallation succeeded.
[root@localhost script]#

📕执行安装

[root@localhost script]# su - omm
上一次登录：四 4月 11 15:46:24 CST 2024
[omm@bigdata01 ~]$ gs_install -X /opt/software/openGauss/cluster_config.xml
Parsing the configuration file.
Successfully checked gs_uninstall on every node.
Check preinstall on every node.
Successfully checked preinstall on every node.
Creating the backup directory.
Successfully created the backup directory.
begin deploy..
Installing the cluster.
begin prepare Install Cluster..
Checking the installation environment on all nodes.
begin install Cluster..
Installing applications on all nodes.
Successfully installed APP.
begin init Instance..
encrypt cipher and rand files for database.
Please enter password for database:
Please repeat for database:
begin to create CA cert files
The sslcert will be generated in /home/opengauss/app/share/sslcert/om
NO cm_server instance, no need to create CA for CM.
Non-dss_ssl_enable, no need to create CA for DSS
Cluster installation is completed.
Configuring.
Deleting instances from all nodes.
Successfully deleted instances from all nodes.
Checking node configuration on all nodes.
Initializing instances on all nodes.
Updating instance configuration on all nodes.
Check consistence of memCheck and coresCheck on database nodes.
Successful check consistence of memCheck and coresCheck on all nodes.
Configuring pg_hba on all nodes.
Configuration is completed.

The cluster status is Normal.
Successfully started cluster.
Successfully installed application.
end deploy..
[omm@bigdata01 ~]$

📕验证

数据库安装完成后，会默认生成名称为postgres的数据库

[omm@bigdata01 ~]$ gs_om -t status
-----------------------------------------------------------------------

cluster_name    : openGaussDB
cluster_state   : Normal
redistributing  : No

-----------------------------------------------------------------------
[omm@bigdata01 ~]$ 
[omm@bigdata01 ~]$ gsql -d postgres -p 15400
gsql ((openGauss 5.1.0 build b5a8d5b0) compiled at 2023-09-28 00:09:57 commit 0 last mr  )
Non-SSL connection (SSL connection is recommended when requiring high-security)
Type "help" for help.

openGauss=# help
You are using gsql, the command-line interface to gaussdb.
Type:  \copyright for distribution terms
       \h for help with SQL commands
       \? for help with gsql commands
       \g or terminate with semicolon to execute query
       \q to quit
openGauss=# \h
Available help:
  ABORT                             ALTER TEXT SEARCH CONFIGURATION   CREATE NODE GROUP                 DROP DIRECTORY                    EXPLAIN
  ALTER APP WORKLOAD GROUP          ALTER TEXT SEARCH DICTIONARY      CREATE OPERATOR                   DROP EVENT                        FETCH
  ALTER APP WORKLOAD GROUP MAPPING  ALTER TRIGGER                     CREATE PACKAGE                    DROP EVENT TRIGGER                GRANT
  ALTER AUDIT POLICY                ALTER TYPE                        CREATE PACKAGE BODY               DROP EXTENSION                    INSERT
  ALTER DATA SOURCE                 ALTER USER                        CREATE PROCEDURE                  DROP FOREIGN TABLE                LOCK
  ALTER DATABASE                    ALTER VIEW                        CREATE PUBLICATION                DROP FUNCTION                     MERGE
  ALTER DEFAULT PRIVILEGES          ALTER WORKLOAD GROUP              CREATE RESOURCE LABEL             DROP GLOBAL CONFIGURATION         MOVE
  ALTER DIRECTORY                   ANALYSE                           CREATE RESOURCE POOL              DROP GROUP                        PREDICT BY
  ALTER EVENT                       ANALYZE                           CREATE ROLE                       DROP INDEX                        PREPARE
  ALTER EVENT TRIGGER               ANONYMOUS BLOCK                   CREATE ROW LEVEL SECURITY POLICY  DROP MASKING POLICY               PREPARE TRANSACTION
  ALTER EXTENSION                   ARCHIVE SNAPSHOT                  CREATE SCHEMA                     DROP MATERIALIZED VIEW            PUBLISH SNAPSHOT
  ALTER FOREIGN TABLE               BEGIN                             CREATE SEQUENCE                   DROP MODEL                        PURGE
  ALTER FOREIGN TABLE FOR HDFS      CALL                              CREATE SERVER                     DROP NODE                         PURGE SNAPSHOT
  ALTER FUNCTION                    CHECKPOINT                        CREATE SNAPSHOT AS                DROP NODE GROUP                   REASSIGN OWNED
  ALTER GLOBAL CONFIGURATION        CLEAN CONNECTION                  CREATE SNAPSHOT FROM              DROP OPERATOR                     REFRESH MATERIALIZED VIEW
  ALTER GROUP                       CLOSE                             CREATE SUBSCRIPTION               DROP OWNED                        REINDEX
  ALTER INDEX                       CLUSTER                           CREATE SYNONYM                    DROP PACKAGE                      REPLACE
  ALTER LARGE OBJECT                COMMENT                           CREATE TABLE                      DROP PACKAGE BODY                 RESET
  ALTER MASKING POLICY              COMMIT                            CREATE TABLE AS                   DROP PROCEDURE                    REVOKE
  ALTER MATERIALIZED VIEW           COMMIT PREPARED                   CREATE TABLE PARTITION            DROP PUBLICATION                  ROLLBACK
  ALTER NODE                        COPY                              CREATE TABLE SUBPARTITION         DROP RESOURCE LABEL               ROLLBACK PREPARED
  ALTER NODE GROUP                  CREATE APP WORKLOAD GROUP         CREATE TABLESPACE                 DROP RESOURCE POOL                SAMPLE SNAPSHOT
  ALTER OPERATOR                    CREATE APP WORKLOAD GROUP MAPPING CREATE TEXT SEARCH CONFIGURATION  DROP ROLE                         SAVEPOINT
  ALTER PACKAGE                     CREATE AUDIT POLICY               CREATE TEXT SEARCH DICTIONARY     DROP ROW LEVEL SECURITY POLICY    SELECT
  ALTER PROCEDURE                   CREATE BARRIER                    CREATE TRIGGER                    DROP SCHEMA                       SELECT INTO
  ALTER PUBLICATION                 CREATE CLIENT MASTER KEY          CREATE TYPE                       DROP SEQUENCE                     SET
  ALTER RESOURCE LABEL              CREATE COLUMN ENCRYPTION KEY      CREATE USER                       DROP SERVER                       SET CONSTRAINTS
  ALTER RESOURCE POOL               CREATE DATA SOURCE                CREATE VIEW                       DROP SUBSCRIPTION                 SET ROLE
  ALTER ROLE                        CREATE DATABASE                   CREATE WEAK PASSWORD DICTIONARY   DROP SYNONYM                      SET SESSION AUTHORIZATION
  ALTER ROW LEVEL SECURITY POLICY   CREATE DIRECTORY                  CREATE WORKLOAD GROUP             DROP TABLE                        SET TRANSACTION
  ALTER SCHEMA                      CREATE EVENT                      CURSOR                            DROP TABLESPACE                   SHOW
  ALTER SEQUENCE                    CREATE EVENT TRIGGER              DEALLOCATE                        DROP TEXT SEARCH CONFIGURATION    SHOW EVENTS
  ALTER SERVER                      CREATE EXTENSION                  DECLARE                           DROP TEXT SEARCH DICTIONARY       START TRANSACTION
  ALTER SESSION                     CREATE FOREIGN TABLE              DELETE                            DROP TRIGGER                      TIMECAPSULE TABLE
  ALTER SUBSCRIPTION                CREATE FUNCTION                   DO                                DROP TYPE                         TRUNCATE
  ALTER SYNONYM                     CREATE GROUP                      DROP APP WORKLOAD GROUP           DROP USER                         UPDATE
  ALTER SYSTEM KILL SESSION         CREATE INDEX                      DROP APP WORKLOAD GROUP MAPPING   DROP VIEW                         VACUUM
  ALTER SYSTEM SET                  CREATE LANGUAGE                   DROP AUDIT POLICY                 DROP WEAK PASSWORD DICTIONARY     VALUES
  ALTER TABLE                       CREATE MASKING POLICY             DROP CLIENT MASTER KEY            DROP WORKLOAD GROUP               
  ALTER TABLE PARTITION             CREATE MATERIALIZED VIEW          DROP COLUMN ENCRYPTION KEY        END                               
  ALTER TABLE SUBPARTITION          CREATE MODEL                      DROP DATA SOURCE                  EXECUTE                           
  ALTER TABLESPACE                  CREATE NODE                       DROP DATABASE                     EXECUTE DIRECT                    
openGauss=#

📚第三章 安装总结

  • 安装5.0.1快要成功的时候，业务人员说应该安装5.1.0，好在安装步骤都一样，只要替换一下安装包即可
  • 安装5.0.1最大的坑就是环境必须是python3.6，但是5.1.0版本，就没这个限制了
    在这里插入图片描述
    在这里插入图片描述
  • 安装过程还有就是其它一些软件安装，除了官网提到的bzip2，还有expect等，根据错误提示缺啥就安装啥即可

⁉️问题记录

❓问题一：执行gs_preinstall报错：Python 解释器在编译时未使用 -enable-shared 选项

[root@localhost openGauss]# cd /opt/software/openGauss/script
[root@localhost script]# ./gs_preinstall -U omm -G dbgrp -X /opt/software/openGauss/cluster_config.xml
Traceback (most recent call last):
  File "./gs_preinstall", line 32, in <module>
    check_python_compiler_option()
  File "/opt/software/openGauss/script/gspylib/common/CheckPythonVersion.py", line 39, in check_python_compiler_option
    carry the -enable-shared parameters")
Exception: [GAUSS-52200] : When compiling python,             carry the -enable-shared parameters
[root@localhost script]#

❗解决方式：重新安装python,放开–enable-shared

./configure --enable-optimizations --enable-shared
make
make intall

❓问题二：No module named ‘_ctypes’

[root@localhost script]# /usr/local/bin/python3.7 ./gs_preinstall -U omm -G dbgrp -X /opt/software/openGauss/cluster_config.xml
Traceback (most recent call last):
  File "./gs_preinstall", line 48, in <module>
    from gspylib.common.Common import DefaultValue
  File "/opt/software/openGauss/script/gspylib/common/Common.py", line 20, in <module>
    import ctypes
  File "/usr/local/lib/python3.7/ctypes/__init__.py", line 7, in <module>
    from _ctypes import Union, Structure, Array
ModuleNotFoundError: No module named '_ctypes'
[root@localhost script]#

❗解决方式：安装libffi-devel

yum install libffi-devel -y

在这里插入图片描述

make && make install

安装好libffi-devel之后，重新编译安装python之后，尝试导入import _ctypes，可以正常导入
在这里插入图片描述

❓问题三：libpython3.6m.so.1.0 未找到

[root@localhost script]# /usr/local/bin/python3.7 ./gs_preinstall -U omm -G dbgrp -X /opt/software/openGauss/cluster_config.xml
Traceback (most recent call last):
  File "/opt/software/openGauss/script/gspylib/common/Common.py", line 64, in <module>
    import psutil
  File "/opt/software/openGauss/script/gspylib/common/../../../lib/psutil/__init__.py", line 102, in <module>
    from . import _pslinux as _psplatform
  File "/opt/software/openGauss/script/gspylib/common/../../../lib/psutil/_pslinux.py", line 26, in <module>
    from . import _psutil_linux as cext
  File "/opt/software/openGauss/script/gspylib/common/../../../lib/psutil/_psutil_linux.py", line 7, in <module>
    __bootstrap__()
  File "/opt/software/openGauss/script/gspylib/common/../../../lib/psutil/_psutil_linux.py", line 6, in __bootstrap__
    imp.load_dynamic(__name__,__file__)
  File "/usr/local/lib/python3.7/imp.py", line 342, in load_dynamic
    return _load(spec)
ImportError: /opt/software/openGauss/script/gspylib/common/../../../lib/psutil/_psutil_linux.so: cannot open shared object file: No such file or directory

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "./gs_preinstall", line 48, in <module>
    from gspylib.common.Common import DefaultValue
  File "/opt/software/openGauss/script/gspylib/common/Common.py", line 98, in <module>
    import psutil
  File "/opt/software/openGauss/script/gspylib/common/../../../lib/psutil/__init__.py", line 102, in <module>
    from . import _pslinux as _psplatform
  File "/opt/software/openGauss/script/gspylib/common/../../../lib/psutil/_pslinux.py", line 26, in <module>
    from . import _psutil_linux as cext
ImportError: libpython3.6m.so.1.0: cannot open shared object file: No such file or directory
[root@localhost script]# 
[root@localhost script]#

❗解决方式：重新安装python3.6（5.0版本只支持python3.6）

在这里插入图片描述

❓问题四：Failed to read clusterName. Error:

[root@localhost script]# python3.6 ./gs_preinstall -U omm -G dbgrp -X /opt/software/openGauss/cluster_config.xml  
[GAUSS-50204] : Failed to read clusterName. Error:

❗解决方式：配置不对

配置文件name属性被改了，还原为clusterName即可，value属性是可以改的
在这里插入图片描述

❓问题五： Failed to obtain local instance information

[root@localhost script]# python3.6 ./gs_preinstall -U omm -G dbgrp -X /opt/software/openGauss/cluster_config.xml  
[GAUSS-51620] : Failed to obtain local instance information. It is not a host name localhost.localdomain.
[root@localhost script]#

❗解决方式：修改主机名

根据报错修改为对应的主机名，和配置文件保持一致：hostnamectl set-hostname 要修改的名字

[root@localhost script]# python3.6 ./gs_preinstall -U omm -G dbgrp -X /opt/software/openGauss/cluster_config.xml  
[GAUSS-51620] : Failed to obtain local instance information. It is not a host name localhost.localdomain.
[root@localhost script]# 
[root@localhost script]# 
[root@localhost script]# 
[root@localhost script]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

192.168.2.10 bigdata01
192.168.2.11 bigdata02
192.168.2.12 bigdata03
[root@localhost script]# hostname
localhost.localdomain
[root@localhost script]# hostnamectl set-hostname bigdata01
[root@localhost script]# 
[root@localhost script]# 
[root@localhost script]# hostname
bigdata01
[root@localhost script]#

❓问题六：[GAUSS-51405] : You need to install software:expect

直接根据报错进行软件安装

[root@localhost script]# python3.6 ./gs_preinstall -U omm -G dbgrp -X /opt/software/openGauss/cluster_config.xml  
[GAUSS-51405] : You need to install software:expect

[root@localhost script]# 
[root@localhost script]# yum install -y expect

在这里插入图片描述

❓问题七：[FAILURE] bigdata02:[GAUSS-51251] : The /home/opengauss/app cannot be a root user group or a lin

根据报错进行修改，更改文件所属用户

❓问题八：[GAUSS-51405] : You need to install software:[‘bzip2’]

直接根据报错进行软件安装： yum install -y bzip2

[SUCCESS] bigdata01:
[FAILURE] bigdata02:
[GAUSS-51405] : You need to install software:['bzip2']

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：/a/537641.html

如若内容造成侵权/违法违规/事实不符，请联系我们进行投诉反馈qq邮箱809451989@qq.com，一经查实，立即删除！

相关文章

volta(轻松切换管理Node.js版本）

volta(轻松切换管理Node.js版本）

Node.js版本管理 Volta提供了一个简单直观的命令行界面&#xff0c;可以轻松地安装、卸载、更新和切换Node.js版本。 Volta 既可以全局使用&#xff0c;也可以在项目级别使用&#xff0c;可以为每个项目单独设置node版本&#xff0c;nvm不行。 下载安装Volta 参考&#xff1a; …
阅读更多...
vue3 依赖-组件tablepage-vue3说明文档，列表页快速开发，使用思路及范例（Ⅲ）列表项及分页器配置及props配置

vue3 依赖-组件tablepage-vue3说明文档，列表页快速开发，使用思路及范例（Ⅲ）列表项及分页器配置及props配置

vue3 依赖-组件tablepage-vue3说明文档&#xff0c;列表页快速开发&#xff0c;使用思路及范例&#xff08;Ⅰ&#xff09;配置项文档 vue3 依赖-组件tablepage-vue3说明文档&#xff0c;列表页快速开发&#xff0c;使用思路及范例&#xff08;Ⅱ&#xff09;搜索及数据获取配…
阅读更多...
基于SpringBoot的冬奥会科普平台

基于SpringBoot的冬奥会科普平台

基于SpringBoot的冬奥会科普平台系统设计与实现 开发语言&#xff1a;Java 框架&#xff1a;springboot JDK版本&#xff1a;JDK1.8 服务器&#xff1a;tomcat7 数据库&#xff1a;mysql 5.7&#xff08;一定要5.7版本&#xff09; 数据库工具&#xff1a;Navicat11 开发…
阅读更多...
pip install opencv-python出现ModuleNotFoundError: No module named ‘skbuild‘错误解决方案

pip install opencv-python出现ModuleNotFoundError: No module named ‘skbuild‘错误解决方案

问题描述 File “”, line 1, in File “/tmp/pip-build-o148qsmj/opencv-python/setup.py”, line 10, in from skbuild import cmaker, setup ModuleNotFoundError: No module named ‘skbuild’ Command “python setup.py egg_info” failed with error code 1 in /tmp…
阅读更多...
Java入门-数组

Java入门-数组

数组 什么是数组 数组( array )是一种最简单的复合数据类型&#xff0c;它是有序数据的集合&#xff0c;数组中的每个元素具有相同的数据类型&#xff0c;可以用一个统一的数组名和不同的下标来确定数组中唯一的元素。 数组的内存结构是分配一系列内存大小相等的连续空间。 …
阅读更多...
Vue 引入config.js后别的js访问不到window对象下的属性

Vue 引入config.js后别的js访问不到window对象下的属性

Vue项目里，我们项目配置的请求服务器地址都是在public里config.js里，如下例： 然后在index.html里引入config.js,如下图： 这里要注意的是，script的src要写上<%= BASE_URL %>，代码如下： <!DOCTYPE html> <html><head><meta charset="…
阅读更多...
SNRO 编号范围对象管控,唯一ID

SNRO 编号范围对象管控,唯一ID

事务代码:SNRO 代码引用: DATA: MAXTID TYPE I,NEWNO TYPE CHAR8. CALL FUNCTION NUMBER_RANGE_ENQUEUE EXPORTING OBJECT ZQC57 EXCEPTIONS FOREIGN_LOCK 1 OBJECT_NOT_FOUND 2 SYSTEM_FAILURE 3 OTHERS …
阅读更多...
Python3.7编程之病毒

Python3.7编程之病毒

基础篇 什么是病毒 病毒&#xff0c;指的是一些通过非法手段获取系统的一些权限&#xff0c;然后进行破坏或者盗取。 病毒分为两类&#xff1a; 1、破坏型 这类病毒往往会将系统弄的乱七八糟&#xff0c;比如把你的U盘删光&#xff0c;把你的系统背景调成黑客图片&#xff0c…
阅读更多...
NoETL 公开课预告｜下周二，第三代指标平台即将展露真容

NoETL 公开课预告｜下周二，第三代指标平台即将展露真容

100% 统一指标口径、100% 自动化指标开发、100% 灵活指标分析、强大的指标定义能力和查询加速性能、“管、研、用”一体、做“轻”数仓…… 很多小伙伴都非常好奇 buff 叠满的第三代指标平台 Aloudata CAN 到底长什么样。接下来我们安排了 7 期开箱直播&#xff0c;结合企业业…
阅读更多...
Flutter学习13 - Widget

Flutter学习13 - Widget

1、Flutter中常用 Widget 2、StatelessWidget 和 StateFulWidget Flutter 中的 widget 有很多&#xff0c;但主要分两种&#xff1a; StatelessWidget无状态的 widget如果一个 widget 是最终的或不可变的&#xff0c;那么它就是无状态的StatefulWidget有状态的 widget如果一个…
阅读更多...
腾讯云向量数据库-RAG介绍

腾讯云向量数据库-RAG介绍

1.说明 RAG结合LLM(通用大预言模型)构件基于私有文档、专业领域知识、实时信息的charbot。 2.RAG的主要步骤 知识切片成chunk向量化chunk入库query检索知识chunk构件prompts调用llm生成回答 3.优势 快速构件demo快速理解rag社区支持 4.痛点 投入大效果差调优难 5.RAG应…
阅读更多...
MURF1640CT-ASEMI快恢复二极管MURF1640CT

MURF1640CT-ASEMI快恢复二极管MURF1640CT

编辑&#xff1a;ll MURF1640CT-ASEMI快恢复二极管MURF1640CT 型号&#xff1a;MURF1640CT 品牌&#xff1a;ASEMI 封装&#xff1a;TO-220F 最大平均正向电流&#xff08;IF&#xff09;&#xff1a;16A 最大循环峰值反向电压&#xff08;VRRM&#xff09;&#xff1a;4…
阅读更多...
【Java】JDK1.8 HashMap源码，put源码详细讲解

【Java】JDK1.8 HashMap源码，put源码详细讲解

&#x1f4dd;个人主页&#xff1a;哈__ 期待您的关注 在Java中&#xff0c;HashMap结构是被经常使用的&#xff0c;在面试当中也是经常会被问到的。这篇文章我给大家分享一下我对于HashMap结构源码的理解。 HashMap的存储与一般的数组不同&#xff0c;HashMap的每一个元素存…
阅读更多...
SQLite从出生到现在（发布历史记录）（二十二）

SQLite从出生到现在（发布历史记录）（二十二）

返回&#xff1a;SQLite—系列文章目录 上一篇&#xff1a;从 SQLite 3.5.9 迁移到 3.6.0&#xff08;二十一&#xff09; 下一篇&#xff1a;SQLite—系列文章目录 引言&#xff1a; SQLite拥有别人无法比拟的装机量&#xff0c;究竟什么成就了SQLite呢&#xff0c;本…
阅读更多...
WPS制作表格热图

WPS制作表格热图

最近看到一篇文献使用了表格热图&#xff0c;于是想着用wps制作一个类似的。表格热图可以使表格中的数字大小变得更加直观。 参考文献原文&#xff1a;Miller, O.L., Helman, D., Tal Svoray, Morin, E., Bonfil, D.J., 2019. Explicit wheat production model adjusted for s…
阅读更多...
2024/4/2—力扣—栈的最小值

2024/4/2—力扣—栈的最小值

代码实现&#xff1a; typedef struct node {int val;struct node *next; } Node;typedef struct {struct node *top;int min; } MinStack;/** initialize your data structure here. */MinStack* minStackCreate() {MinStack *obj malloc(sizeof(*obj));obj->top NULL;ob…
阅读更多...
Failure Unable to retrieve image details-解决Portainer与Docker v26不兼容问题

Failure Unable to retrieve image details-解决Portainer与Docker v26不兼容问题

文章目录 前言解决过程解决方法一解决方法二 前言 今天登上服务器习惯性的升级了yum软件包&#xff0c;结果这一更新后导致Portainer不能正常使用&#xff0c;后续进行成功解决&#xff0c;简单记录一下 解决过程 事故过程模拟 当时顺手升级下docker版本(V26.0.1) 结果Porta…
阅读更多...
Golang 状态机设计模式

Golang 状态机设计模式

本文介绍了Golang状态机模式的一个实现示例&#xff0c;通过该模式&#xff0c;可以解耦调用链&#xff0c;有助于实现测试友好的代码&#xff0c;提高代码质量。原文: Go State Machine Patterns 导言 在我们开发的许多项目中&#xff0c;都需要依赖某种运行状态从而实现连续操…
阅读更多...
LeetCode-62. 不同路径【数学 动态规划 组合数学】

LeetCode-62. 不同路径【数学 动态规划 组合数学】

LeetCode-62. 不同路径【数学 动态规划 组合数学】 题目描述&#xff1a;解题思路一&#xff1a;动态规划&#xff0c;动规五部曲解题思路二&#xff1a;动态规划&#xff08;版本二&#xff09;解题思路三&#xff1a;数论 题目描述&#xff1a; 一个机器人位于一个 m x n 网…
阅读更多...
麦肯锡问题分析七步法

麦肯锡问题分析七步法

麦肯锡七步分析法又称“七步分析法”是麦肯锡公司根据他们做过的大量案例&#xff0c;总结出的一套对商业机遇的分析方法。它是一种在实际运用中&#xff0c;对新创公司及成熟公司都很重要的思维、工作方法。麦肯锡问题分析7步法为企业提供了一个结构化的问题解决框架&#xff…
阅读更多...
最新文章

Copyright @ 2022~2023