GRE_MGRE综合实验

目录

1、R5为ISP，只能进行IP地址配置，其所有地址均配为公有IP地址。

IP配置

配置公网全网通

2、（1）R1和R5间使用PPP的PAP认证，R5为主认证方。

PAP认证

（2）R2与R5之间使用ppp的CHAP认证，R5为主认证方。

（3）R3与R5之间使用HDLC封装。

3、R1、R2、R3构建一个MGRE环境，R1为中心站点，R1、R4间为点到点的GRE。

构建隧道

配置NHRP

查看

配置GRE隧道

4、整个私有网络基于RIP全网可达。

RIP配置

开启R1Tunnel0/0/0口的伪广播功能

 关闭水平分割

 5、所有PC设置私有IP为源IP，可以访问R5环回，实现全网通。 

easy IP配置

1、R5为ISP，只能进行IP地址配置，其所有地址均配为公有IP地址。

IP配置

R1：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
Mar 29 2024 16:47:26-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R1-GigabitEthernet0/0/0]q
[R1]int s4/0/0
[R1-Serial4/0/0]ip add 15.1.1.1 24
[R1-Serial4/0/0]q
[R1]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.1.1/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial4/0/0                       15.1.1.1/24          up         up        
Serial4/0/1                       unassigned           down       down      
[R1]

R2：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R2
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.2.2 24
Mar 29 2024 16:49:49-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R2-GigabitEthernet0/0/0]q
[R2]int s4/0/0
[R2-Serial4/0/0]ip add 25.1.1.2 24
[R2-Serial4/0/0]q
[R2]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.2.2/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial4/0/0                       25.1.1.2/24          up         up        
Serial4/0/1                       unassigned           down       down      
[R2]

R3：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R3
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 192.168.3.3 24
[R3-GigabitEthernet0/0/0]
Mar 29 2024 16:52:19-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]q
[R3]int s4/0/0
[R3-Serial4/0/0]ip add 35.1.1.3 24
[R3-Serial4/0/0]q
[R3]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.3.3/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial4/0/0                       35.1.1.3/24          up         up        
Serial4/0/1                       unassigned           down       down      
[R3]

R4：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R4
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 45.1.1.4 24
Mar 29 2024 16:54:35-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R4-GigabitEthernet0/0/0]q
[R4]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.4.4 24
Mar 29 2024 16:54:52-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R4-GigabitEthernet0/0/1]q
[R4]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              45.1.1.4/24          up         up        
GigabitEthernet0/0/1              192.168.4.4/24       up         up        
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
[R4]

ISP：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname ISP
[ISP]int s4/0/1
[ISP-Serial4/0/1]ip add 15.1.1.5 24
[ISP-Serial4/0/1]
Mar 29 2024 16:56:20-08:00 ISP %%01IFNET/4/LINK_STATE(l)[0]:The line protocol PP
P IPCP on the interface Serial4/0/1 has entered the UP state. 
[ISP-Serial4/0/1]q
[ISP]int s3/0/1
[ISP-Serial3/0/1]ip add 25.1.1.5 24
[ISP-Serial3/0/1]
Mar 29 2024 16:56:43-08:00 ISP %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PP
P IPCP on the interface Serial3/0/1 has entered the UP state. 
[ISP-Serial3/0/1]q
[ISP]int s4/0/0
[ISP-Serial4/0/0]ip add 35.1.1.5 24
[ISP-Serial4/0/0]
Mar 29 2024 16:57:01-08:00 ISP %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PP
P IPCP on the interface Serial4/0/0 has entered the UP state. 
[ISP-Serial4/0/0]q
[ISP]int g0/0/0
[ISP-GigabitEthernet0/0/0]ip add 45.1.1.5 24
Mar 29 2024 16:57:47-08:00 ISP %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
 on the interface GigabitEthernet0/0/0 has entered the UP state. 
[ISP-GigabitEthernet0/0/0]q
[ISP]int LoopBack 0
[ISP-LoopBack0]ip add 5.5.5.5 24
[ISP-LoopBack0]q
[ISP]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 6
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 6
The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              45.1.1.5/24          up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         5.5.5.5/24           up         up(s)     
NULL0                             unassigned           up         up(s)     
Serial3/0/0                       unassigned           down       down      
Serial3/0/1                       25.1.1.5/24          up         up        
Serial4/0/0                       35.1.1.5/24          up         up        
Serial4/0/1                       15.1.1.5/24          up         up        
[ISP]

PC1：

PC2：

PC3：

PC4：

配置公网全网通

R1：

[R1]ip route-static 0.0.0.0 0 15.1.1.5

R2：

[R2]ip route-static 0.0.0.0 0 25.1.1.5

R3：

[R3]ip route-static 0.0.0.0 0 35.1.1.5

R4：

[R4]ip route-static 0.0.0.0 0 45.1.1.5


2、（1）R1和R5间使用PPP的PAP认证，R5为主认证方。

PAP认证

ISP为主认证方，所以在ISP上配置账户：

R5：

[ISP]aaa
[ISP-aaa]local-user a1 password cipher a12345
Info: Add a new user.
[ISP-aaa]local-user a1 service-type ppp
[ISP-aaa]q
[ISP]int s4/0/1
[ISP-Serial4/0/1]ppp authentication-mode pap

R1：

[R1]int s4/0/0
[R1-Serial4/0/0]ppp pap local-user a1 password cipher a12345

验证：

[R1-Serial4/0/0]shutdown 
Mar 29 2024 18:12:22-08:00 R1 %%01PPP/4/PHYSICALDOWN(l)[0]:On the interface Seri
al4/0/0, PPP link was closed because the status of the physical layer was Down. 

[R1-Serial4/0/0]
Mar 29 2024 18:12:22-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PPP
 on the interface Serial4/0/0 has entered the DOWN state. 
[R1-Serial4/0/0]
Mar 29 2024 18:12:22-08:00 R1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPP
 IPCP on the interface Serial4/0/0 has entered the DOWN state. 
[R1-Serial4/0/0]
Mar 29 2024 18:12:22-08:00 R1 %%01IFPDT/4/IF_STATE(l)[3]:Interface Serial4/0/0 h
as turned into DOWN state.
[R1-Serial4/0/0]undo shutdown 
[R1-Serial4/0/0]
Mar 29 2024 18:12:31-08:00 R1 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h
as turned into UP state.
[R1-Serial4/0/0]
Mar 29 2024 18:12:34-08:00 R1 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol PPP
 on the interface Serial4/0/0 has entered the UP state. 
[R1-Serial4/0/0]
Mar 29 2024 18:12:34-08:00 R1 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol PPP
 IPCP on the interface Serial4/0/0 has entered the UP state. 
[R1-Serial4/0/0]

（2）R2与R5之间使用ppp的CHAP认证，R5为主认证方。

依然是R5为主，故在R5上配置账户：

R5：

[ISP]aaa
[ISP-aaa]local-user b1 password cipher b12345
Info: Add a new user.
[ISP-aaa]local-user b1 service-type ppp
[ISP-aaa]q
[ISP-Serial3/0/1]ppp authentication-mode chap

R2：

[R2]int s4/0/0
[R2-Serial4/0/0]ppp chap user b1	
[R2-Serial4/0/0]ppp chap password cipher b12345

验证：

[R2-Serial4/0/0]shutdown 
Mar 29 2024 18:17:41-08:00 R2 %%01PPP/4/PHYSICALDOWN(l)[0]:On the interface Seri
al4/0/0, PPP link was closed because the status of the physical layer was Down. 

[R2-Serial4/0/0]
Mar 29 2024 18:17:41-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PPP
 on the interface Serial4/0/0 has entered the DOWN state. 
[R2-Serial4/0/0]
Mar 29 2024 18:17:41-08:00 R2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPP
 IPCP on the interface Serial4/0/0 has entered the DOWN state. 
[R2-Serial4/0/0]
Mar 29 2024 18:17:41-08:00 R2 %%01IFPDT/4/IF_STATE(l)[3]:Interface Serial4/0/0 h
as turned into DOWN state.
[R2-Serial4/0/0]undo shutdown 
[R2-Serial4/0/0]
Mar 29 2024 18:17:50-08:00 R2 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h
as turned into UP state.
[R2-Serial4/0/0]
Mar 29 2024 18:17:53-08:00 R2 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol PPP
 on the interface Serial4/0/0 has entered the UP state. 
[R2-Serial4/0/0]
Mar 29 2024 18:17:54-08:00 R2 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol PPP
 IPCP on the interface Serial4/0/0 has entered the UP state. 
[R2-Serial4/0/0]

（3）R3与R5之间使用HDLC封装。

R5：

[ISP]int s4/0/0
[ISP-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Mar 29 2024 18:22:40-08:00 ISP %%01IFNET/4/CHANGE_ENCAP(l)[14]:The user performe
d the configuration that will change the encapsulation protocol of the link and 
then selected Y. 
[ISP-Serial4/0/0]
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01PPP/4/PHYSICALDOWN(l)[15]:On the interface Se
rial4/0/0, PPP link was closed because the status of the physical layer was Down
. 
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01IFNET/4/LINK_STATE(l)[16]:The line protocol P
PP on the interface Serial4/0/0 has entered the DOWN state. 
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01IFNET/4/LINK_STATE(l)[17]:The line protocol P
PP IPCP on the interface Serial4/0/0 has entered the DOWN state. 
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01IFPDT/4/IF_STATE(l)[18]:Interface Serial4/0/0
 has turned into DOWN state.
[ISP-Serial4/0/0]
Mar 29 2024 18:22:41-08:00 ISP %%01IFPDT/4/IF_STATE(l)[19]:Interface Serial4/0/0
 has turned into UP state.
[ISP-Serial4/0/0]
Mar 29 2024 18:22:41-08:00 ISP %%01IFNET/4/LINK_STATE(l)[20]:The line protocol I
P on the interface Serial4/0/0 has entered the UP state. 
[ISP-Serial4/0/0]

R3：

[R3]int s4/0/0
[R3-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Mar 29 2024 18:23:02-08:00 R3 %%01IFNET/4/CHANGE_ENCAP(l)[0]:The user performed 
the configuration that will change the encapsulation protocol of the link and th
en selected Y. 
[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01PPP/4/PHYSICALDOWN(l)[1]:On the interface Seri
al4/0/0, PPP link was closed because the status of the physical layer was Down. 

[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPP
 on the interface Serial4/0/0 has entered the DOWN state. 
[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol PPP
 IPCP on the interface Serial4/0/0 has entered the DOWN state. 
[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h
as turned into DOWN state.
[R3-Serial4/0/0]
Mar 29 2024 18:23:03-08:00 R3 %%01IFPDT/4/IF_STATE(l)[5]:Interface Serial4/0/0 h
as turned into UP state.
[R3-Serial4/0/0]
Mar 29 2024 18:23:03-08:00 R3 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol IP 
on the interface Serial4/0/0 has entered the UP state. 
[R3-Serial4/0/0]

验证：

3、R1、R2、R3构建一个MGRE环境，R1为中心站点，R1、R4间为点到点的GRE。

构建隧道

首先配置MGRE隧道：

R1：

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.2.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R1-Tunnel0/0/0]source 15.1.1.1
Mar 29 2024 18:33:05-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R1-Tunnel0/0/0]

R2：

[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ip add 10.1.2.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R2-Tunnel0/0/0]source s4/0/0
Mar 29 2024 18:35:02-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state.

R3：

[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.2.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R3-Tunnel0/0/0]source s4/0/0
Mar 29 2024 18:36:12-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R3-Tunnel0/0/0]

配置NHRP

R1：

[R1-Tunnel0/0/0]nhrp network-id 100

R2：

[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register

R3：

[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register

查看

配置GRE隧道

R1：

[R1]int Tunnel 0/0/1
[R1-Tunnel0/0/1]ip add 10.1.1.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.1.1.1
[R1-Tunnel0/0/1]destination 45.1.1.4

R4：

[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ip add 10.1.1.2 24
[R4-Tunnel0/0/1]tunnel-protocol gre	
[R4-Tunnel0/0/1]source 45.1.1.4
[R4-Tunnel0/0/1]destination 15.1.1.1

R1：

R4：

4、整个私有网络基于RIP全网可达。

RIP配置

R1：

[R1]rip 1
[R1-rip-1]version 2
[R1-rip-1]undo summary 	
[R1-rip-1]network 192.168.1.0        	
[R1-rip-1]network 10.0.0.0
[R1-rip-1]

R2:

[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]undo summary 
[R2-rip-1]network 192.168.2.0
[R2-rip-1]network 10.0.0.0

R3:

[R3]rip 1
[R3-rip-1]version 2
[R3-rip-1]undo summary 
[R3-rip-1]network 192.168.3.0
[R3-rip-1]network 10.0.0.0

R4:

[R4]rip 1
[R4-rip-1]v 2
[R4-rip-1]undo summary 
[R4-rip-1]network 192.168.4.0
[R4-rip-1]network 10.0.0.0

开启R1Tunnel0/0/0口的伪广播功能

[R1-Tunnel0/0/0]nhrp entry multicast dynamic

 关闭水平分割

水平分割 --- 从哪个接口学到的路由信息将不再从这个接口发出去。

故使用rip的路由器不能发送其他主机的路由信息，要实现全网通，我们就得关闭该功能。

R1：

[R1-Tunnel0/0/0]undo rip split-horizon

R2：

[R2-Tunnel0/0/0]undo rip split-horizon

R3：

[R3-Tunnel0/0/0]undo rip split-horizon

至此，R2和R3就能学习到其他的路由信息。

R2 ping 一下R3后再查看 NHRP表（因为两台路由器间没有发包可能不会更新NHRP表）：

R2：

R3：

 5、所有PC设置私有IP为源IP，可以访问R5环回，实现全网通。 

easy IP配置

R1：

[R1]acl 2000	
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1-acl-basic-2000]q
[R1]int s4/0/0
[R1-Serial4/0/0]nat outbound 2000

检验：

 

R2：

[R2]acl 2000	
[R2-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[R2-acl-basic-2000]q
[R2]int s4/0/0
[R2-Serial4/0/0]nat outbound 2000

检验：

R3：

[R3]acl 2000	
[R3-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R3-acl-basic-2000]q
[R3]int s4/0/0
[R3-Serial4/0/0]nat outbound 2000

检验：

R4：

[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4-acl-basic-2000]q
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]nat outbound 2000

检验：

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：/a/499667.html

如若内容造成侵权/违法违规/事实不符，请联系我们进行投诉反馈qq邮箱809451989@qq.com，一经查实，立即删除！

相关文章

顺序栈、链式栈、顺序队列、链式队列的ADT及其实现

顺序栈、链式栈、顺序队列、链式队列的ADT及其实现

顺序栈ADT及其实现 链式栈ADT及其实现 顺序队列的ADT及其实现 在数组中队首队尾的分配方案 第三中方案&#xff0c;即达到入队出队操作的时间代价是O&#xff08;1&#xff09; 同时可充分利用空间&#xff0c;不会出现空间似乎用完了的假象 时间性能和空间性能发挥到最大 链…
阅读更多...
Qt FFmpeg开发环境配置以及测试 - 不编译源码

Qt FFmpeg开发环境配置以及测试 - 不编译源码

Qt FFmpeg环境配置以及测试 引言一、下载二、配置三、测试 引言 FFmpeg是一套可以用来记录、转换数字音频、视频&#xff0c;并能将其转化为流的开源计算机程序。它采用了LGPL或GPL许可证&#xff0c;并提供了录制、转换以及流化音视频的完整解决方案。 FFmpeg包含了非常先进的…
阅读更多...
【C++】map set

【C++】map set

文章目录 1. 关联式容器2. 键值对3. 树形结构的关联式容器3.1 set3.1.1 set 的介绍3.1.2 set 的使用 3.2 map3.2.1 map 的介绍3.2.2 map 的使用 3.3 multiset3.3.1 multuset 的介绍3.3.2 multiset 的使用 3.4 multimap3.4.1 multimap 的介绍3.4.2 multimap 的使用 1. 关联式容器…
阅读更多...
【文献分享】PyPlume程序：快速海洋表面传输评估的工具包

【文献分享】PyPlume程序：快速海洋表面传输评估的工具包

PyPlume: A toolkit for rapid ocean surface transport assessments PyPlume&#xff1a;快速海洋表面传输评估的工具包 PyPlume 是一个 Python 工具箱和管道&#xff0c;用于统一从模型和观测加载二维洋流矢量场、模拟轨迹模型以及分析和可视化粒子轨迹的过程。提供了 Ju…
阅读更多...
Java_21 完成一半题目

Java_21 完成一半题目

完成一半题目 有 N 位扣友参加了微软与力扣举办了「以扣会友」线下活动。主办方提供了 2*N 道题目&#xff0c;整型数组 questions 中每个数字对应了每道题目所涉及的知识点类型。 若每位扣友选择不同的一题&#xff0c;请返回被选的 N 道题目至少包含多少种知识点类型。 示例…
阅读更多...
python requirement.txt编译问题，代理问题为解决。

python requirement.txt编译问题，代理问题为解决。

Date: 03/28/2024 11:00-12:00 Date: 03/27/2024 19:00-21:00 问题现象&#xff1a;开启代理后&#xff0c;无法正常下载 PS D:\workspace\winform\canvas\mysite依赖包> python -m pip install flatlib-0.2.3-py3-none-any.whl Looking in indexes: https://mirrors.ust…
阅读更多...
WHM面板备份与恢复方法

WHM面板备份与恢复方法

上周有一个Hostease客户&#xff0c;购买了WHM面板的服务器&#xff0c;联系我们关于WHM面板中备份如何设置。接下来&#xff0c;我们分享如何在WHM面板中进行备份设置。 以下是在 WHM 面板中进行备份和恢复的基本步骤&#xff1a; 备份配置&#xff1a; 登录 WHM 控制面板&…
阅读更多...
《 Arm Compiler 5.06 》__ARM编译器官网下载、安装和使用说明（小白也能懂）

《 Arm Compiler 5.06 》__ARM编译器官网下载、安装和使用说明（小白也能懂）

目录 一、前言 二、官方网站下载 三、我的资源 四、编译器安装在 Keil 软件上 五、Keil选择编译器V5 “ V5.06 update 7(build 960) ” 六、测试 (*&#xffe3;︶&#xffe3;)创作不易&#xff01;期待你们的 点赞、收藏和评论喔。 一、前言 【Keil MDK-Arm5.37】不再…
阅读更多...
Linux课程____selinux模式

Linux课程____selinux模式

一、是什么 它叫做“安全增强型 Linux&#xff08;Security-Enhanced Linux&#xff09;”&#xff0c;简称 SELinux&#xff0c;它是 Linux 的一个安全子系统 二、有啥用 就是最大限度地减小系统中服务进程可访问的资源&#xff08;根据的是最小权限原则&#xff09;。避免…
阅读更多...
三个对象组练习.java

三个对象组练习.java

题目&#xff1a;定义数组存储3部汽车对象&#xff1b;汽车属性&#xff1a;品牌&#xff0c;价格&#xff0c;颜色&#xff1b;创造3个汽车对象&#xff0c;数据通过键盘录入而来&#xff0c;并把数据存储到数组当中 分析&#xff1a; 在main&#xff08;&#xff09;里面定义…
阅读更多...
QT----基于QT的人脸考勤系统ubuntu系统运行，编译到rk3588开发板运行

QT----基于QT的人脸考勤系统ubuntu系统运行，编译到rk3588开发板运行

目录 1 Ubantu编译opencv和seetaface库1.1 Ubantu编译opencv1.2 Ubuntu编译seetaface1.3 安装qt 2 更改代码2.1 直接运行报错/usr/bin/ld: cannot find -lGL: No such file or directory2.2 遇到报错摄像头打不开2.3 修改部分代码2.4 解决中文语音输出问题 3 尝试交叉编译rk358…
阅读更多...
产品经理如何提高产品业务逻辑？4个重点

产品经理如何提高产品业务逻辑？4个重点

产品经理培养良好的产品业务逻辑能力&#xff0c;能够更准确地理解和挖掘用户需求&#xff0c;梳理出详实且符合实际业务场景的产品需求文档&#xff0c;从而确保项目开发的方向正确、目标明确。而清晰的产品业务逻辑有助于减少项目执行中的反复沟通和需求确认&#xff0c;有助…
阅读更多...
《数据结构学习笔记---第七篇》---栈和队列的OJ练习

《数据结构学习笔记---第七篇》---栈和队列的OJ练习

1. 括号匹配问题。OJ链接 step1:思路分析 &#xff1a; 1.括号匹配&#xff0c;我们首先考虑用栈实现&#xff0c;我们通过符号栈帧的思想知道&#xff0c;求前中后缀表达式的时候用的就是栈帧&#xff0c;操作数栈和符号栈。 2.根据常见的情况 考虑怎么使用栈&#xff0c;首先…
阅读更多...
【产品经理】华为IPD需求管理全思路分享！

【产品经理】华为IPD需求管理全思路分享！

作为一名产品经理&#xff0c;会在日常工作中接收到各种需求&#xff0c;而解决需求要提供对应的解决方案。本篇文章以华为的IPD需求管理流程为例&#xff0c;探讨其需求管理思路&#xff0c;帮助产品岗位的你快速做好需求管理并解决方案。 一、理清什么是产品需求 说到这个话…
阅读更多...
AcWing 528. 奶酪（每日一题）

AcWing 528. 奶酪（每日一题）

目录 题目&#xff1a; DFS&#xff08;BFS&#xff09;&#xff1a; 并查集&#xff1a; 总结&#xff1a; 原题链接&#xff1a;528. 奶酪 - AcWing题库 题目&#xff1a; 现有一块大奶酪&#xff0c;它的高度为 h&#xff0c;它的长度和宽度我们可以认为是无限大的&am…
阅读更多...
【C语言】内存函数(memmove)的使用和模拟实现

【C语言】内存函数(memmove)的使用和模拟实现

目录 前言memmove定义1.在cplusplus中的定义 memmove的模拟实现1、思路2、难点3、解决方法 模拟实现代码 前言 这篇文章讲述了memcpy的使用、模拟实现和一个未解决的问题内存函数(memcpy)的使用和模拟实现 当我们使用我们模拟的my_memcpy拷贝&#xff0c;当源拷贝地址与目标拷…
阅读更多...
基于Axios封装请求---防止接口重复请求解决方案

基于Axios封装请求---防止接口重复请求解决方案

一、引言 前端接口防止重复请求的实现方案主要基于以下几个原因&#xff1a; 用户体验&#xff1a;重复发送请求可能导致页面长时间无响应或加载缓慢&#xff0c;从而影响用户的体验。特别是在网络不稳定或请求处理时间较长的情况下&#xff0c;这个问题尤为突出。 服务器压力…
阅读更多...
Intel Arc显卡安装Stable Diffusion

Intel Arc显卡安装Stable Diffusion

StableDiffusion是一种基于深度学习的文本到图像生成模型&#xff0c;于2022年发布。它主要用于根据文本描述生成详细图像&#xff0c;也可应用于其他任务&#xff0c;如内补绘制、外补绘制和在提示词指导下生成图像翻译。通过给定文本提示词&#xff0c;该模型会输出一张匹配提…
阅读更多...
C语言编译与链接

C语言编译与链接

前言 我们想一个问题&#xff0c;我们写的C语言代码都是文本信息&#xff0c;电脑能直接执行c语言代码吗&#xff1f;肯定不能啊&#xff0c;计算机能执行的是二进制指令&#xff0c;所以将C语言转化为二进制指令需要一段过程&#xff0c;这篇博客讲一下编译与链接&#xff0c;…
阅读更多...
Go打造REST Server【二】：用路由的三方库来实现

Go打造REST Server【二】：用路由的三方库来实现

前言 在之前的文章中&#xff0c;我们用Go的标准库来实现了服务器&#xff0c;JSON渲染重构为辅助函数&#xff0c;使特定的路由处理程序相当简洁。 我们剩下的问题是路径路由逻辑&#xff0c;这是所有编写无依赖HTTP服务器的人都会遇到的问题&#xff0c;除非服务器只处理一到…
阅读更多...
最新文章

Copyright @ 2022~2023