接前一篇文章：
上一回讲解了pci_edu_realize函数中的pci_register_bar函数，本回开始对于edu设备的MMIO读写函数进行解析。
操作系统与PCI设备交互的主要方式是PIO和MMIO。MMIO虽然是一段内存，但是其没有EPT映射，在虚拟机访问设备的MMIO时，会产生VM Exit；KVM识别此MMIO访问并且将该访问分派到应用层QEMU中；QEMU根据内存虚拟化的步骤进行分派，找到设备注册的MMIO读写回调函数；设备的MMIO读写回调函数根据设备的功能进行模拟，完成模拟之后可能会发送中断到虚拟机中，从而完成一些MMIO访问。
前文书（QEMU源码全解析 —— PCI设备模拟（5））已经讲过，pci_edu_realize函数中调用memory_region_init_io函数，指定其读写函数是edu_mmio_ops。
edu_mmio_ops在hw/misc/edu中初始化，代码如下：
static const MemoryRegionOps edu_mmio_ops = {
.read = edu_mmio_read,
.write = edu_mmio_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 8,
},
.impl = {
.min_access_size = 4,
.max_access_size = 8,
},
};edu_mmio_ops的类型为MemoryRegionOps，此结构在include/exec/memory.h中定义，代码如下：
typedef struct MemoryRegionOps MemoryRegionOps;而struct MemoryRegionOps的定义也在include/exec/memory.h中，如下：
/*
* Memory region callbacks
*/
struct MemoryRegionOps {
/* Read from the memory region. @addr is relative to @mr; @size is
* in bytes. */
uint64_t (*read)(void *opaque,
hwaddr addr,
unsigned size);
/* Write to the memory region. @addr is relative to @mr; @size is
* in bytes. */
void (*write)(void *opaque,
hwaddr addr,
uint64_t data,
unsigned size);
MemTxResult (*read_with_attrs)(void *opaque,
hwaddr addr,
uint64_t *data,
unsigned size,
MemTxAttrs attrs);
MemTxResult (*write_with_attrs)(void *opaque,
hwaddr addr,
uint64_t data,
unsigned size,
MemTxAttrs attrs);
enum device_endian endianness;
/* Guest-visible constraints: */
struct {
/* If nonzero, specify bounds on access sizes beyond which a machine
* check is thrown.
*/
unsigned min_access_size;
unsigned max_access_size;
/* If true, unaligned accesses are supported. Otherwise unaligned
* accesses throw machine checks.
*/
bool unaligned;
/*
* If present, and returns #false, the transaction is not accepted
* by the device (and results in machine dependent behaviour such
* as a machine check exception).
*/
bool (*accepts)(void *opaque, hwaddr addr,
unsigned size, bool is_write,
MemTxAttrs attrs);
} valid;
/* Internal implementation constraints: */
struct {
/* If nonzero, specifies the minimum size implemented. Smaller sizes
* will be rounded upwards and a partial result will be returned.
*/
unsigned min_access_size;
/* If nonzero, specifies the maximum size implemented. Larger sizes
* will be done as a series of accesses with smaller sizes.
*/
unsigned max_access_size;
/* If true, unaligned accesses are supported. Otherwise all accesses
* are converted to (possibly multiple) naturally aligned accesses.
*/
bool unaligned;
} impl;
};
其中的read和Write函数分别表示该MMIO的读写回调；endianness表示字节的大小端模式。
以write回调函数为例，
/* Write to the memory region. @addr is relative to @mr; @size is
* in bytes. */
void (*write)(void *opaque,
hwaddr addr,
uint64_t data,
unsigned size);static void edu_mmio_write(void *opaque, hwaddr addr, uint64_t val,
unsigned size)其原型中的opaque表示的是设备的对象；addr表示虚拟机读的地址在该MMIO中的偏移地址；data（val）表示要写入的值；size表示写入值的大小，通常由单字节、双字节、四字节以及八字节。
edu_mmio_write函数同样在hw/misc/edu.c中，代码如下：
static void edu_mmio_write(void *opaque, hwaddr addr, uint64_t val,
unsigned size)
{
EduState *edu = opaque;
if (addr < 0x80 && size != 4) {
return;
}
if (addr >= 0x80 && size != 4 && size != 8) {
return;
}
switch (addr) {
case 0x04:
edu->addr4 = ~val;
break;
case 0x08:
if (qatomic_read(&edu->status) & EDU_STATUS_COMPUTING) {
break;
}
/* EDU_STATUS_COMPUTING cannot go 0->1 concurrently, because it is only
* set in this function and it is under the iothread mutex.
*/
qemu_mutex_lock(&edu->thr_mutex);
edu->fact = val;
qatomic_or(&edu->status, EDU_STATUS_COMPUTING);
qemu_cond_signal(&edu->thr_cond);
qemu_mutex_unlock(&edu->thr_mutex);
break;
case 0x20:
if (val & EDU_STATUS_IRQFACT) {
qatomic_or(&edu->status, EDU_STATUS_IRQFACT);
/* Order check of the COMPUTING flag after setting IRQFACT. */
smp_mb__after_rmw();
} else {
qatomic_and(&edu->status, ~EDU_STATUS_IRQFACT);
}
break;
case 0x60:
edu_raise_irq(edu, val);
break;
case 0x64:
edu_lower_irq(edu, val);
break;
case 0x80:
dma_rw(edu, true, &val, &edu->dma.src, false);
break;
case 0x88:
dma_rw(edu, true, &val, &edu->dma.dst, false);
break;
case 0x90:
dma_rw(edu, true, &val, &edu->dma.cnt, false);
break;
case 0x98:
if (!(val & EDU_DMA_RUN)) {
break;
}
dma_rw(edu, true, &val, &edu->dma.cmd, true);
break;
}
}
edu_mmio_write函数展示了一个虚拟机在写设备MMIO地址时QEMU中设备模拟的典型行为。
（1）首先，需要检查读写地址以及大小是否在范围之内。代码片段如下：
if (addr < 0x80 && size != 4) {
return;
}
if (addr >= 0x80 && size != 4 && size != 8) {
return;
}（2）然后，根据具体的地址来进行适当的行为。
这些行为可以是简单地设置一个值，如这里的写0x04地址，代码片段如下：
case 0x04:
edu->addr4 = ~val;
break;也可以是将中断设置为高电平（写0x60地址）或者设置为低电平（写0x64地址），代码片段如下：
case 0x60:
edu_raise_irq(edu, val);
break;
case 0x64:
edu_lower_irq(edu, val);
break;还可以是通过dma读写设备虚拟机的物理地址（写0x80地址），代码片段如下：
case 0x80:
dma_rw(edu, true, &val, &edu->dma.src, false);
break;对于read回调函数，也是类似的机制。这里仅给出edu_mmio_read函数源码，在hw/misc/edu.c中，代码如下：
static uint64_t edu_mmio_read(void *opaque, hwaddr addr, unsigned size)
{
EduState *edu = opaque;
uint64_t val = ~0ULL;
if (addr < 0x80 && size != 4) {
return val;
}
if (addr >= 0x80 && size != 4 && size != 8) {
return val;
}
switch (addr) {
case 0x00:
val = 0x010000edu;
break;
case 0x04:
val = edu->addr4;
break;
case 0x08:
qemu_mutex_lock(&edu->thr_mutex);
val = edu->fact;
qemu_mutex_unlock(&edu->thr_mutex);
break;
case 0x20:
val = qatomic_read(&edu->status);
break;
case 0x24:
val = edu->irq_status;
break;
case 0x80:
dma_rw(edu, false, &val, &edu->dma.src, false);
break;
case 0x88:
dma_rw(edu, false, &val, &edu->dma.dst, false);
break;
case 0x90:
dma_rw(edu, false, &val, &edu->dma.cnt, false);
break;
case 0x98:
dma_rw(edu, false, &val, &edu->dma.cmd, false);
break;
}
return val;
}
欲知后事如何，且看下回分解。
