VLAN综合实验

一、实验拓扑

二、实验要求

三、实验步骤

1、交换机配置vlan

1）SW1配置

2）SW2配置

3）SW3配置

2、路由器配置子接口、DHCP

配置结果：

PC1-6IP地址

测试

一、实验拓扑

二、实验要求

1、pc1和pc3所在接口为access，属于vlan 2
pc2/pc4/pc5/pc6处于同一网段；其中pc2可以访问pc4/pc5/pc6;但pc4可以访问pc6；pc5不能访问pc6
2、pc1 /pc3 与pc2/pc4/pc5/pc6不在同一网段
3、所有pc通过DHCP获取IP地址，且pc1 /pc3可以正常访问pc2/pc4/pc5/pc6

pc1和pc3为access接口，且都在vlan 2，需其余主机不在同一网段，通过子接口实现

pc2/pc4/pc5/pc6处于同一网段，且有权限设置，则接口类型用混杂模式实现

交换机之间所有流量都需经过，所以将其接口类型设置为trunk模式，允许所有VLAN通过

在SW1连接路由器接口上，将vlan 2流量进行打标签，将流量转向子接口，剩余流量设置不打标签，去往物理接口

三、实验步骤

1、交换机配置vlan

1）SW1配置

GE0/0/1 --access vlan 2

GE0/0/2 -- 默认hybrid，接收vlan 4/5/6
（PC2的允许列表是VALAN3、VALAN4、VALAN5、VALAN6不带标签的数据流都能够通）

GE0/0/3 --trunk，允许所有vlan通过

GE0/0/4 -- hybrid，剥离vlan 3/4/5/6标签，带标签vlan2

[SW1]vlan batch 2 to 6
[SW1-GigabitEthernet0/0/1]port link-type access 
[SW1-GigabitEthernet0/0/1]port default vlan 2

[SW1-GigabitEthernet0/0/2]port hybrid pvid vlan 3 
[SW1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 4 5 6

[SW1-GigabitEthernet0/0/3]port link-type trunk 
[SW1-GigabitEthernet0/0/3]port trunk allow-pass vlan all

[SW1-GigabitEthernet0/0/4]port hybrid untagged vlan 3 4 5 6
[SW1-GigabitEthernet0/0/4]port hybrid tagged vlan 2

2）SW2配置

[SW2]vlan batch 2 to 6
[SW2-GigabitEthernet0/0/3]port link-type trunk 
[SW2-GigabitEthernet0/0/3]port trunk allow-pass vlan all

[SW2-GigabitEthernet0/0/1]port link-type access
[SW2-GigabitEthernet0/0/1]port default vlan 2

[SW2-GigabitEthernet0/0/2]port hybrid pvid vlan 4
[SW2-GigabitEthernet0/0/2]port hybrid untagged vlan 3 4 5 6

[SW2-GigabitEthernet0/0/4]port link-type trunk 
[SW2-GigabitEthernet0/0/4]port trunk allow-pass vlan all

3）SW3配置

[SW3]vlan batch 2 to 6
[SW3-GigabitEthernet0/0/3]port link-type trunk 
[SW3-GigabitEthernet0/0/3]port trunk allow-pass vlan all

[SW3-GigabitEthernet0/0/1]port hybrid pvid vlan 5
[SW3-GigabitEthernet0/0/1]port hybrid untagged vlan 3 4 5

[SW3-GigabitEthernet0/0/2]port hybrid pvid vlan 6
[SW3-GigabitEthernet0/0/2]port hybrid untagged vlan 3 4 6

2、路由器配置子接口、DHCP

[AR1]int g0/0/0.1
[AR1-GigabitEthernet0/0/0.1]ip add 192.168.2.1 24
[AR1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[AR1-GigabitEthernet0/0/0.1]arp broadcast enable 
[AR1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[AR1-GigabitEthernet0/0/0]dhcp enable

[AR1]ip pool v36
[AR1-ip-pool-v36]network 192.168.1.0 mask 24
[AR1-ip-pool-v36]gateway-list 192.168.1.1 
[AR1-ip-pool-v36]dns-list 114.114.114.114

[AR1]ip pool v2
[AR1-ip-pool-v2]network 192.168.2.0 mask 24
[AR1-ip-pool-v2]gateway 192.168.2.1 
[AR1-ip-pool-v2]dns-list 114.114.114.114

[AR1]int g0/0/0.1
[AR1-GigabitEthernet0/0/0.1]dhcp select global 
[AR1]int g0/0/0
[AR1-GigabitEthernet0/0/0]dhcp select global