这种模式只做负载分担，不能是主备备份，因为主备备份模式下，备设备会把vlan down掉，如果是主备备份模式，那在主挂后，备的状态在切换过程中先起vlan，再建立ospf邻接，那业务会断线较久，不推荐这样做。
FW1
hrp enable
hrp interface GigabitEthernet1/0/2 remote 172.16.0.2
vlan 2
port g1/0/0
prot g1/0/1
hrp track action
hrp track standby
interface GigabitEthernet1/0/2
undo shutdown
ip address 172.16.0.1 255.255.255.0
firewall zone trust
set priority 85
add interface GigabitEthernet0/0/0
add interface GigabitEthernet1/0/1
firewall zone untrust
set priority 5
add interface GigabitEthernet1/0/0
firewall zone dmz
set priority 50
add interface GigabitEthernet1/0/2
security-policy //暂时全允许
default action permit
FW2:
hrp enable
hrp interface GigabitEthernet1/0/2 remote 172.16.0.1
vlan 2
port g1/0/0
prot g1/0/1
hrp track standby
hrp track action
interface GigabitEthernet1/0/2
undo shutdown
ip address 172.16.0.2 255.255.255.0
firewall zone trust
set priority 85
add interface GigabitEthernet0/0/0
add interface GigabitEthernet1/0/1
firewall zone untrust
set priority 5
add interface GigabitEthernet1/0/0
firewall zone dmz
set priority 50
add interface GigabitEthernet1/0/2
security-policy
default action permit
查看
dis hrp state ver
